教授 博士生导师 硕士生导师
1) Yang H, Jiang G, Tian W, et al. Microservice-based Digital Twin System Towards Smart Manufacturing[J]. Robotics and Computer-Integrated Manufacturing, 2024, 91(102858)：1-12.
2) Yang H, Feng C, Jiang G, et al. Digital Twin-enabled Health Prognostics for Smart Manufacturing Systems under Uncertain Conditions [J]. IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, 2024, 20(12)：14072-14082.
3）Xiaobing F, Fei Z, Gedong J, Tao T, Xuesong M，A tabu memory based iterated greedy algorithm for the distributed heterogeneous permutation flowshop scheduling problem with the total tardiness criterion，Expert Systems with Applications，2024,238:121790（SCI已收录）
4）Liu, B., Rocco, P., Zanchettin, A. M., Zhao, F., Jiang, G., Mei, X.. A real-time hierarchical control method for safe human robot coexistence. Robotics and Computer Integrated Manufacturing, 2024(86), 102666. (SCI，IF=10.4, 一区 TOP).
5） Wenwen T, Jiong Z, Fei Z, Gedong J, Xuesong M, Guangde C, Hao W，A Novel Fuzzy Echo State Broad Learning System for Surface Roughness Virtual Metrology，IEEE Transactions on Industrial Informatics，2024,20(3):3756-3766（SCI已收录）
6）Zhiwei L, Gedong J, Fei Z, Yuqiang W, Yang Y, Xuesong M，Dynamic Skill Learning From Human Demonstration Based on the Human Arm Stiffness Estimation Model and Riemannian DMP，IEEE/ASME Transactions on Mechatronics, 2023, 28(2): 1149-1160（SCI已收录）
7）B. Liu, G. Jiang, F. Zhao and X. Mei, "Collision-Free Motion Generation Based on Stochastic Optimization and Composite Signed Distance Field Networks of Articulated Robot," inIEEE Robotics and Automation Letters, vol. 8, no. 11, pp. 7082-7089, Nov. 2023, doi:10.1109/LRA.2023.3311357. (SCI，IF=5.2，已发表).
8）Qingzhen Z, Xuesong M, Gedong J, et al，Influence of surface morphology and processing parameters on polishing of silicon carbide ceramics using femtosecond laser pulses，Surfaces and Interfaces，2023,36:102528（SCI已收录）
9）Liao Z, Lorenzini M, Leonori M, Zhao F, Jiang G, Ajoudani A. An Ergo-Interactive Framework forHuman-Robot Collaboration via Learning from Demonstration[J]. IEEE Robotics and AutomationLetters (RAL), 2023, 9(1): 359-366. (SCI, 中科院 2 区， TOP 期刊，IF: 5.2)
10） Wangwang H, Xuesong M, Zhengjie F, Gedong J, Wenjun W, Ruting Z，Pixel-wise phase unwrapping of fringe projection profilometry based on deep learning，Measurement，2023,220:113323（SCI已收录）
11） Qingzhen Z, Xuesong M, Gedong J, et al，Investigation on ultrasonic vibration-assisted femtosecond laser polishing of C/SiC composites，Journal of the European Ceramic Society，2023,43(11):4656-4672（SCI已收录）
12） Zhu Bo, Geng Tao*, Jiang Gedong, Guan Zheng. Surrounding Object Material Detection and Identification Method for Robots Based on Ultrasonic Echo Signals[J]. APPLIED BIONICS AND BIOMECHANICS, 2023: 1-12, (SCI).
13）Hongyang D, Gedong J, Tao T, Ruisheng Z, Zongzhuo Y, Xuesong M，A thermal error modeling method for CNC lathes based on thermal distortion decoupling and nonlinear programming，The International Journal of Advanced Manufacturing Technology，2023,128(5):2599-2612（SCI已收录）
14）Suiyan Shang, Gedong Jiang, Zheng Sun*, Wenwen Tian, Dawei Zhang, Jun Xu, Chifai Cheung: Roughness prediction of end milling surface for behavior mapping of digital twined machine tools. Digital Twin, 2023, 3: 4.
15）Liao Z, Jiang G, Zhao F, Wu Y, Yue Y, Mei X. Dynamic Skills Learning from Human Demonstration Based on the Human Arm Stiffness Generation Model and Riemannian DMPs[J]. IEEE/ASME Transactions on Mechatronics (TMech), 2022, 28(2): 1149-1160. (SCI, 中科院 1 区， TOP 期刊，IF: 6.4)
16）Liao Z, Zhao F, Jiang G, Mei X. Extended DMPs Framework for Position and Decoupled Quaternion Learning and Generalization[J]. Chinese Journal of Mechanical Engineering, 2022, 35(1): 1-13.(SCI, 中科院 2 区，中国卓越期刊，IF: 4.2)
17）Hanbo Y, S. K. Ong, A. Y. C. Nee, Gedong J, Xuesong M，Microservices-based cloud-edge collaborative condition monitoring platform for smart manufacturing systems，International Journal of Production Research，2022, 60(24):7492-7501（SCI已收录）
18）Hanbo Y, Xuesong M, Gedong J, Tao T, Zheng S, Fei Z，Remaining Useful Life Prediction of Ball Screw Under Time-Varying Conditions With Limited Data，IEEE/ASME Transactions on Mechatronics，2022,27(5):4057-4066（SCI已收录）
19）Xialun Yun, Xuesong Mei, Gedong Jiang. Time-delayed feedback stochastic resonance enhanced minimum entropy deconvolution for weak fault detection of rolling element bearings Chinese Journal of Physics 76 (2022) 1–13. (SCI)
20）HB. Yang, Z. Sun, GD. Jiang, F. Zhao, XF. Lu, XS. Mei (2021) Cloud-Manufacturing-Based Condition Monitoring Platform With 5G and Standard Information Model. IEEE Internet of Things Journal 8: 6940 – 6948. 一区 IF 9.41
21）Zhang, Xian; Jiang, Gedong; Zhang, Hao; Reliability analysis for dependent competing failure of harmonic drive with strength failure and stiffness degradation failure. ENGINEERING COMPUTATIONS MAY 2021
22）Huang, Wangwang; Mei, Xuesong; Jiang, Gedong; An on-machine tool path generation method based on hybrid and local point cloud registration for laser deburring of ceramic cores. JOURNAL OF INTELLIGENT MANUFACTURING MAY 2021
23）HB. Yang, Z. Sun, GD. Jiang, F. Zhao, XS. Mei Remaining useful life prediction for machinery by establishing scaled-corrected health indicators. Measurement. 2020,163(1):108035.
24）HB. Yang, GD. Jiang, Z. Sun, ZN. Zhang, F. Zhao, T. Tao, XS. Mei (2021) Remaining Useful Life Prediction of Ball Screw Using Precision Indicator. IEEE TIM 70:3519509.
25）Hui, Yang; Mei, Xuesong; Jiang, Gedong; Assembly quality evaluation for linear axis of machine tool using data-driven modeling approach. JOURNAL OF INTELLIGENT MANUFACTURING OCT 2020；
26）Hui, Yang; Mei, Xuesong; Jiang, Gedong; 等 Assembly consistency improvement of straightness error of the linear axis based on the consistency degree and GA-MSVM-I-KM. JOURNAL OF INTELLIGENT MANUFACTURING, AUG 2020 (6): 1429-1441
27）Zhang, Xian; Tao, Tao; Jiang, Gedong; 等 A Refined Dynamic Model of Harmonic Drive and Its Dynamic Response Analysis. SHOCK AND VIBRATION 卷: 2020 文献号: 1841724 出版年: JUN 29 2020；
28） Liao, Zhiwei; Jiang, Gedong; Zhao, Fei; 等 A novel solution of inverse kinematic for 6R robot manipulator with offset joint based on screw theory. INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS 卷: 17 期: 3 文献号: 1729881420925645 出版年: MAY 2020.
29）Zhang, Xian; Jiang, Gedong; Zhang, Hao; 等. Time-dependent reliability analysis of harmonic drive based on transient FEA and accelerated life test. ENGINEERING COMPUTATIONS 卷: 37 期: 7 页: 2293-2317 出版年: 2020
30） Mohan Lei, Gedong Jiang, Liang Zhao, Jinshi Wang, Ben Q. Li, Jun Yang*, Xuesong Mei. Thermal error controlling for the spindle in a precision boring machine with external cooling across coated joints[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2020, 234(2): 658-675.
31）Guo, Shijie ; Mei, Xuesong ; Jiang, Gedong，Geometric accuracy enhancement of five-axis machine tool based on error analysis，International Journal of Advanced Manufacturing Technology，105（1-4），November 1, 2019，p137-153, 20193207286058
32）Hui, Yang; Mei, Xuesong; Jiang, Gedong*, Milling Tool Wear State Recognition by Vibration Signal Using a Stacked Generalization Ensemble Model, SHOCK AND VIBRATION卷: 2019，文献号: 7386523，出版年: NOV 3 2019
33）Lei, Mohan; Jiang, Gedong; Zhao, Liang, Thermal error controlling for the spindle in a precision boring machine with external cooling across coated joints. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE，文献号: UNSP 0954406219879720 在线发表日期: OCT 2019
34）Hu, Zhenbang; Jiang, Gedong*; Mei, Xuesong. Online Prediction of Milling Inner Hole Roundness Error Based on Accurate SSEM Value Extraction SHOCK AND VIBRATION 卷: 2019，文献号: 6049316，出版年: AUG 5 2019
35）Wang, Shuang; Jiang, Gedong*; Mei, Xuesong. A rapid stress calculation method for short flexspline harmonic drive. ENGINEERING COMPUTATIONS，卷: 36，期: 6，页: 1852-1867 出版年: JUL 8 2019
36）Yun, Xialun; Mei, Xuesong*; Jiang, Gedong. A new dynamic balancing method of spindle based on the identification energy transfer coefficient. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 在线发表日期: OCT 2019
37）Yun, Xialun; Mei, Xuesong*; Jiang, Gedong, A new dynamic balancing method of spindle based on the identification energy transfer coefficient. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY，卷: 33，期: 10，页: 4595-4604，出版年: OCT 2019
38）Yun, XL (Yun, Xialun) ; Mei, XS (Mei, Xuesong)* ; Jiang, GD (Jiang, Gedong) ; Hu, ZB (Hu, Zhenbang) ; Zhang, ZH (Zhang, Zunhao). Investigation on a No Trial Weight Spray Online Dynamic Balancer, SHOCK AND VIBRATION，DOI: 10.1155/2018/7021215, 2018，GZ9IH
39）Lei, MH; Jiang, GD; Yang, J*; Mei, XS; Xia, P; Zhao, L. Thermal error modeling with dirty and small training sample for the motorized spindle of a precision boring machine. Int J Adv Manuf Technol. IF=2.209. 卷: 93 期: 1-4 页: 571-586. DOI: 10.1007/s00170-017-0531-7出版年: OCT 2017. FJ6YK. EI: 20172103691082
40）Guo, SJ (Guo, Shijie); Jiang, GD (Jiang, Gedong)* ; Zhang, DS (Zhang, Dongsheng) ; Mei, XS (Mei, Xuesong). Position-independent geometric error identification and global sensitivity analysis for the rotary axes of five-axis machine tools. MEASUREMENT SCIENCE AND TECHNOLOGY. IF=1.585 卷: 28 期: 4文献号: 045006 DOI: 10.1088/1361-6501/aa5856出版年: APR 2017 ES5ET 20171003417520
41）Guo, Shijie; Jiang, Gedong*; Mei, Xuesong. Investigation of sensitivity analysis and compensation parameter optimization of geometric error for five-axis machine tool. International Journal of Advanced Manufacturing Technology. IF=2.209 Issue date: July 14, 2017 Publication Year: 2017Pages: 1-15. FN7DX. EI:20172903953304
42）Zou, C (Zou, Chuang); Tao, T (Tao, Tao); Jiang, GD (Jiang, Gedong)*; Mei, XS (Mei, Xuesong); Wu, JH (Wu, Junhui). A harmonic drive model considering geometry and internal interaction. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE. IF=1.105 卷: 231 期: 4 页: 728-743 DOI: 10.1177/0954406215621097出版年: FEB 2017 EL5RP EI: 20170603330990
43) Wenjun Wang, Gedong Jiang*, Xuesong Mei, Kedian Wang, Jinyou Shao, Chengjuan Yang.Damage mechanism and morphology characteristics of chromium film in femtosecond laser rear-side ablatio，APPLIED SURFACE SCIENCE，MAR 15 2010,256卷,11期, 3612-3617页
44） 姜歌东,王昊,荆亚彬，接触热阻对高速滚珠丝杠副温升特性的影响，吉林大学学报(工学版)，2024:1-8（EI已收录）
45）毕逸飞, 姜歌东, 王高才等. 芯片封装立针微孔加工视觉定位技术研究, Journal of Xi'an Jiaotong University (西安交通大学学报) 2021. 55 (8) , pp.59-67 (EI)
46）运侠伦，章云，梅雪松，姜歌东，袁世珏. 高速电主轴注液式一体化平衡终端优化设计与实验研究，2020.（EI）
47）运侠伦，庞哲凯，章云，姜歌东，刘斌，梅雪松.基于混沌粒子群优化算法的转子不平衡参数辨识研究，振动、测试与诊断，2020.07.（EI）
48） 姜歌东，王爽，梅雪松，张弦，张豪．谐波齿轮传动双圆弧齿形双向共轭设计方法．西安交通大学学报，2019.10 v 53, n 8, p 8-14,
49） 郭世杰, 姜歌东, 梅雪松, 摆头转台型五轴机床旋转轴运动误差测量与辨识, 农业机械学报，2019.2. v 50, n 2, p 402-410, 426.
50）邹创，陶涛，姜歌东，梅雪松，张弦，考虑力学特性的谐波齿轮啮合参数优化方法，西安交通大学学报，2019. 2, v 53, n 2, p 16-23.
51）运侠伦, 梅雪松, 姜歌东, 李玉亭, 袁世珏. 高速主轴角接触球轴承动刚度分析及测试方法, 振动、测试与诊断, 2019.8. v 39, n 4, p 892-897.
52）运侠伦，梅雪松，姜歌东，胡振邦，张尊浩辨识主轴转子系统能量传递特性的矢量匹配平衡方法研究，振动与冲击，2019.5 v 38, n 10, p 138-142,168.
53）运侠伦，梅雪松，姜歌东，胡振邦，张尊浩，喷液式一体化在线动平衡终端的设计与实验研究，振动与冲击 2019.5 v 38, n 10, p 79-84, 111
54）郭世杰，姜歌东，梅雪松，陶涛，转台－摆头式五轴机床几何误差测量及辨识，光学精密工程，2018.11, 26(11), p2684-2694.
55）雷默涵, 姜歌东, 梅雪松, 马驰, 杨军, 高速球轴承微接触弹流摩擦及生热分析, 西安交通大学学报，2016, 50(4), p 81-88.
56）胡振邦, 许睦旬, 姜歌东, 张东升, 基于小波降噪和短时傅里叶变换的主轴突加不平衡非平稳信号分析, 振动与冲击, 2014, (5), p 20-23,36
57）胡振邦, 张东升, 章云, 姜歌东, 梅雪松. 数学形态学滤波器在转子失衡识别中的应用, 振动、测试与诊断, 2014, 34(6), p1038-1044.
58）邹创, 陶涛, 梅雪松, 吕江伟, 姜歌东*，机器人关节短筒谐波减速器接触计算与分析，西安交通大学学报，2013年, 47卷, 5 期, 82-87 页
59）邢铭宗, 赵飞, 姜歌东*, 梅雪松，一种确定自回归滑动平均模型最小阶次的新方法，西安交通大学学报，2011，v 45, No.12, p99-103
1） 姜歌东,王雅各,黄旺旺,凡正杰,梅雪松. 一种高动态表面的高精度三维测量方法. 发明专利, ZL202210243274.8;
2) 姜歌东,王莉,赵飞,杨汉博,陶涛,鲁旭峰,梅雪松,孙铮,运侠伦. 一种智能产线信息建模方法、存储介质和计算设备, 发明专利 ZL2021105368170；
3) 姜歌东 杨汉博 陶涛 赵飞 梅雪松 陈赟，基于双层长短期记忆网络的复杂设备剩余寿命预测方法，发明专利 ZL201811082284.8;
4) 姜歌东; 张弦;梅雪松;邹闯;陶涛;王爽;张豪，一种谐波减速器步降加速寿命试验方法，发明专利, ZL2018100154811;
5) 姜歌东 王军平 裴昌渝 惠阳 梅雪松 王彦波，基于振动信号和Stacking集成模型的刀具磨损状态监测方法，发明专利, ZL201811341366.X;
6) 姜歌东 王彦波 陶涛 梅雪松 惠阳 裴昌渝 胡珂，一种立式加工中心运行特性检测与评估方法，发明专利, ZL201711352683.7;
7) 姜歌东 胡珂 惠阳 许睦旬 梅雪松 裴昌渝 王彦波，一种基于机床进给系统运动特性的装配质量评价方法，发明专利, ZL201711354190.7;
8) 姜歌东; 邹创; 陶涛; 梅雪松; 吴俊慧; 张弦，一种具有鼓形轮齿的扁平谐波传动装置，发明专利, ZL2014108030715;
9) 姜歌东; 赵鹏巍; 陶涛; 郭世杰， 基于平面光栅的三面五线机床空间几何误差测量辨识方法，发明专利, ZL2017109121715;
10) 姜歌东,宋哲,梅雪松,齐太安,孙书川,林英行,陈赟，一种永磁交流伺服系统电流环带宽扩展方法, 发明专利, ZL2016111631571;
11) 姜歌东; 谢成炫; 梅雪松; 陶涛; 邹创; 张弦，一种可用于机械臂误差补偿的双驱动谐波减速装置, 发明专利, ZL2016101578041;5
12) 姜歌东; 陈赟; 梅雪松; 徐学武; 宋哲; 王爽; 孙书川; 高帅; 王宪，一种呼吸道痰液自动清理装置, 发明专利, ZL2016106293289;
13) 姜歌东 陈赟 梅雪松 徐学武 宋哲 王爽 孙书川 高帅 王宪，一种呼吸道痰液自动清理系统及方法, 发明专利, ZL201610629205.5;
14) 姜歌东; 窦成东; 史建强; 王恪典; 陶涛; 张东升; 沈健; 徐仁恺，一种数控机床标准轨迹测试分析系统, 发明专利, ZL2014103406248;
15) 梅雪松，运侠伦，姜歌东等. 一种3D成型的一体化在线动平衡终端, 发明专利， ZL201810019943.7;
16) 梅雪松 胡振邦 姜歌东 张东升 许睦旬 杜兴，磨床的高精度液体静压电主轴轴心轨迹测试系统及方法，发明专利, ZL201610230518.3;
17) 梅雪松 宋哲 姜歌东 许睦旬 林英行 齐太安 孙书川，一种伺服系统可变惯量控制方法与装置, 发明专利, ZL201610273416.X;
18) 梅雪松，运侠伦，姜歌东等. 一种内置式压电型在线动平衡执行装置，发明专利, ZL201810019499.9
19姜歌东等. 一种机器人关节用减速器综合性能测试系统，发明专利，ZL201210385572.7;
20) 姜歌东等. 基于稳态图的ARMA模型阶次确定方法，发明专利，ZL201110139128.2
21) 姜歌东等. 基于机器视觉和平面正交光栅的测量装置及测量方法，发明专利，ZL200610105107.8
1) 机床数控技术（第二版）, 高教出版社, 2021年, 副主编
2）数控技术实验原理及实践指南，普通高等教育“十二五”规划教材，机械工业出版社2013年12月，副主编
3）机床数控技术（第一版），高等教育出版社， 2013年4月，排名第6， 2013年西安交通大学第十三届优秀教材1等奖
4）智能制造基础项目教程，普通高等教育新工科智能制造系列教材，机械工业出版社 2021年，排名第6
