Shao H, Zhao Q, Liang Z, et al. Numerical investigation on a separated structure shell-and-tube waste heat boiler based on experiment[J]. International Journal of Heat and Mass Transfer, 2018, 117: 1006-1018.
Liang Z, Yu M, Xu Z, et al. Influence of Low-Temperature Pre-oxidation by Ozone on Corrosion Resistance of T91 Steel in Steam at 600° C[J]. Oxidation of Metals, 1-10.
Pan P, Chen H, Liang Z, et al. Deposition and corrosion characteristics of liquid-solid droplets on tubular corrosion probes in desulfurized flue gas[J]. Engineering Failure Analysis, 2018, 90: 129-140.
Liang Z, Zhao Q, Deng J, et al. Influence of Aging treatment on the microstructure and mechanical properties of T92/Super 304H dissimilar metal welds[J]. Materials at High Temperatures, 2018, 35 (4): 327-334.
Liang Z, Wang Y, Zhao Q. Steam oxidation behavior of alloy 617 at 900°C to 1100°C[J]. Metallurgical and Materials Transactions A, 2018, 49(7): 3133–3144.
Liang Z, Yu M, Gui Y, et al. Corrosion behavior of heat-resistant materials in the high-temperature carbon dioxide environment[J]. JOM, 2018.
Pan P Y, Chen H, Liang Z Y, et al. Experimental study on corrosion of steels for flue gas reheaters in a coal-fired power plant[J]. Applied Thermal Engineering, 2017, 115: 267-279.
Liang Z, Sha W, Zhao Q, et al. The Effect of Aging Heat Treatment on the Microstructure and Mechanical Properties of 10Cr20Ni25Mo1. 5NbN Austenitic Steel[J]. High Temperature Materials and Processes, 2016, 35(1): 1-7.
Hong X, Zhiyuan L, Jianliang D, et al. Effect of Pre-Oxidation on the Steam Oxidation of Heat-Resistant Steel T92[J]. High Temperature Materials and Processes.
Chen X, Zhao Q, Liang Z. Investigations on the Ash Deposit Formation of Tubular Air Preheater in a Coal-Fired Traveling Grate Boiler[J]. Energy & Fuels, 2017, 31(12): 13215-13220.
Chen L, Li Y, Zhao Q, et al. Removal of NOX Using Hydrogen Peroxide Vapor over Fe/TiO2 Catalysts and an Absorption Technique[J]. Catalysts, 2017, 7(12): 38
2016
Liang Zhiyuan, Singh P M, Zhao Q, et al. High Temperature Oxidation of Newly Developed Alloy 282 in the Flowing-Air and Steam Condition at 900–1100° C[J]. Oxidation of Metals, 2015, 84(3-4): 291-305. (SCI: CQ8VG)
Liang Zhiyuan, Zhao Q, Singh P M, et al. Field studies of steam oxidation behavior of austenitic heat-resistant steel 10Cr18Ni9Cu3NbN[J]. Egineering Failure Analysis, 2015, 53: 132-137. (SCI: CG5UI)
Liang Zhiyuan, Zhao Qinxin,Wang Yungang, et al. Coupling mechanism of dew point corrosion and viscous ash deposits. Materials and Corrosion-werkstoffe Und Korrosion, 2014, 65(8):797-802. (SCI: AN3ZA)
Liang Zhiyuan, Jin X, Zhao Q. Investigation of overheating of the final super-heater in a 660MW power plant[J]. Engineering Failure Analysis, 2014, 45: 59-64. (SCI: AO5AY)
Liang Zhiyuan, Sha W, Zhao Q, et al. The Effect of Aging Heat Treatment on the Microstructure and Mechanical Properties of 10Cr20Ni25Mo1. 5NbN Austenitic Steel[J]. High Temperature Materials and Processes, 2016, 35(1): 1-7. (SCI: DA6UN)
Liang Zhiyuan, Zhao Qinxin. Failure analysis of spiral finned tube on the economizer. Engineering Failure Analysis, 2013, 28:208-214. (SCI: 107RY)
Sha W, Liang Zhiyuan, Zhao Q, et al. High temperature corrosion of typical positions in SUS 30432 tubing bend tested in simulated environment[J]. Materials at High Temperatures, 2015, 32(4): 419-425. (SCI: CH4VD)
Deng J, Liang Zhiyuan, Hui S, et al. Aging Treatment on the Microstructures and Mechanical Properties of New Groove T92/Super 304H Dissimilar Steel Joints[J]. High Temperature Materials and Processes, 2015, 34(5): 425-433. (SCI: CN3LK)
Wang Y G, Zhao Q X, Liang Zhiyuan, et al. Analysis on high-temperature corrosion characteristic of 10Cr18Ni9NbCu3BN steel[J]. Materials Research Innovations, 2015, 19: 104-108. (SCI: CI7QA)
Wang Y, Ma H, Liang Zhiyuan, et al. Experimental study on dew point corrosion characteristics of the heating surface in a 65 t/h biomass-fired circulating fluidized bed boiler[J]. Applied Thermal Engineering, 2016, 96: 76-82. (SCI: DJ0AI)
Zhao Q, Liang Zhiyuan, Jiang W. Studies on High Temperature Corrosion of Austenitic Heat‐Resistant Steels Super 304H/10Cr18Ni9Cu3NbN in Simulated and Real Combustion Gas Atmospheres[J]. Energy Materials 2014, 243-250. (EI: 2700998988)
Liang Zhiyuan, Zhao Q X. Research on Dew Point Corrosion of Materials[J]. Applied Mechanics and Materials. 2013, 281: 441-447.(EI:0515979800)
Liang Zhiyuan, Singh PM, Zhao Qinxin, Effect of pre-oxdiation on the steam oxidation of T92 steel at 650℃[C], NACE 2015, 2015, Dallas.
Liang Zhiyuan, Zhao Qinxin, Singh PM, Oxidation of Fe-Ni-base alloy HR120 and Ni-base alloy 282 in Steam Environment at 800℃ to 1000℃[C], NACE 2016, 2016, Vancouver.
Liang Zhiyuan, Zhao Qinxin, Singh PM，High temperature oxidation of several austenitic steels and nickel-based super-alloys in steam environment [C]. 8th International Conference on Advances in Materials Technology for Fossil Power Plants, 2016, Portugal.
