Welcome to my Researcher ID

 

 

2022年

1. Jiabin Hu, Bo Zhang, Cong Li, Laili Wang, Shenghe Wang, Zhongqi Shi, Jianfeng Yang, Fabrication of Si3N4 ceramics with high thermal conductivity and flexural strength via novel two-step gas-pressure sintering, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 42[12] 4846-4854 (2022) DOI10.1016/j.jeurceramsoc.2022.04.049
2. Songsong Xu, Xiaonan Zhou, Qiang Zhi, Junjie Gao, Liucheng Hao, Zhongqi Shi, Bo Wang, Jianfeng Yang, Kozo Ishizaki, Anisotropic, biomorphic cellular Si3N4 ceramics with directional well-aligned nanowhisker arrays based on wood-mimetic architectures, JOURNAL OF ADVANCED CERAMICS, 11[4] 656-664 (2022). DOI10.1007/s40145-021-0555-1
3. Wenjia Jing, Baoqiang Hou, Jinxiao Wang, Qiang Zhi, Jianfeng Yang, Bo Wang, Fluoride-mediately solvothermal synthesis and tunable photocatalytic selectivity of urchin-like ZrO2 hollow microspheres, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 105[5] 3141-3146 (2022) DOI10.1111/jace.18342
4. Xiaonan Zhou, Songsong Xu, Zhongyu Wang, Liucheng Hao, Zhongqi Shi, Junping Zhao, Qiaogen Zhang, Kozo Ishizaki, Bo Wang, Jianfeng Yang, Wood-Derived, Vertically Aligned, and Densely Interconnected 3D SiC Frameworks for Anisotropically Highly Thermoconductive Polymer Composites, ADVANCED SCIENCE, 9[7] 2103592 (2022) DOI10.1002/advs.202103592
5. Zhong-Yu Wang, Xiao-Nan Zhou, Zi-Xuan Li, Song-Song Xu, Liu-Cheng Hao, Jun-Ping Zhao, Bo Wang, Jian-Feng Yang, Kozo Ishizaki, Enhanced thermal conductivity of epoxy composites by constructing thermal conduction networks via adding hybrid alumina filler, POLYMER COMPOSITES, 43[1] 483-492 (2022) DOI10.1002/pc.26392
6. Wenjia Jing, Jianfeng Yang, Fluoride-mediately oriented assembly of zirconia nanoparticles: 3D monocrystalline architectures and dye degradation, Journal of the American Ceramic Society, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 105[1] 55-60 (2022) DOI10.1111/jace.18095
7. Baoqiang Hou, Haixia Guo, Nanlong Zhang, Qiang Zhi, Bo Wang, Jianfeng Yang, Anisotropic friction behavior of aligned and oriented graphite flakes/copper composite, CARBON, 186, 64-74 (2022) DOI10.1016/j.carbon.2021.09.074

2021年

8. Rong-zhen Liu, Wen-wei Gu, Yu Yang, Yuan Lu, Hong-bin Tan, Jianfeng Yang, Microstructure and mechanical properties of reaction-bonded B4C-SiC composites, INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (矿物冶金与材料学报), 28[11] 1828-1835 (2021) DOI10.1007/s12613-020-2207-9
9. Yu-Chen Deng, Nan-Long Zhang, Qiang Zhi, Bo Wang, Jianfeng Yang, Preparation and Characterization of Pure SiC Ceramics by HTPVT Induced by Seeding with SiC Nanoarrays, MATERIALS, 14[21] 6317 (2021) DOI10.3390/ma14216317
10. Qiang Zhi, Bo Wang, Shan Zhao, Zhao Zhang, Yu-Chen Deng, Bao-Qiang Hou, Nan-Long Zhang, Jianfeng Yang, Simultaneous improvement in porosity and strength of porous beta-Si3N4 ceramics by formation of ultrafine fibrous grains, CERAMICS INTERNATIONAL, 47[6] 8113-8122 (2021). DOI10.1016/j.ceramint.2020.11.166
11. Jinxiao Wang, Jianfeng Yang, Jun Yang, Hui Zhang, An Ni-Co bimetallic MOF-derived hierarchical CNT/CoO/Ni2O3 composite for electromagnetic wave absorption, JOURNAL OF ALLOYS AND COMPOUNDS, 876, 160126 (2021) DOI10.1016/j.jallcom.2021.160126
12. Ting Zhao, Mei-Mei Lian, Yi Qin, Jian-Feng Zhu, Xin-Gang Kong, Jianfeng Yang, Improved performances of lithium disilicate glass-ceramics by seed induced crystallization, JOURNAL OF ADVANCED CERAMICS, 10[3], 614-626 (2021)

2020年

13. Hua CHENG, Jian-Feng YANG and Nan-Long ZHANG，Fabrication and characterization of hierarchical porous SiC ceramics via gelcasting and carbothermal reduction between carbon and SiO，Journal of the Ceramic Society of Japan, 128 [9] 589-594 (2020)
14. Hui Zhang, Jinxiao Wang and Jianfeng Yang, Hydrothermal synthesis and methylene blue adsorption performance of novel 3D hierarchical Li2Si2O5 hydrate particles, Scientific Report, 10[1] 5545(2020)
15. H.-X. Guo and J.-F. Yang, "Fabrication and Tribological Properties of Mesocarbon Microbead-Cu Friction Composites," Materials, 13[2] 463 (2020).
16. B. Liu and J. Yang, "FABRICATION OF HIGHLY DENSE PURE 6H-SiC CERAMICS VIA THE PVT METHODUSING SUB-MICRON SIC POWDERS," Ceramics-Silikaty, 64[2] 135-44 (2020).
17. X. Lyu, H. Hao, B. Hou, B. Wang, J. Yang, and Y. Zhang, "Effects of OH- anion additive concentration in nitrate salt baths on chemical strengthening of Li2O-Al2O3-SiO2(LAS) glass," Ceramics International, 46[2] 1697-704 (2020).
18. B. Wang, X. Huang, X.-N. Zhou, Q. Zhi, L.-C. Hao, Z.-X. Li, S. Zhao, B.-Q. Hou, J.-F. Yang, and K. Ishizaki, "Synthesis and carbothermal nitridation mechanism of ultra-long single crystal alpha-Si3N4 nanobelts," Nanotechnology, 31[19] 194001 (2020).
19. J. Wang, J. Yang, J. Yang, and H. Zhang, "Design of a novel carbon nanotube and metal-organic framework interpenetrated structure with enhanced microwave absorption properties," Nanotechnology, 31[39] 394002 (2020).
20. J. Wang, J. Yang, J. Yang, and H. Zhang, "Design of novel CNT/RGO/ZIF-8 ternary hybrid structure for lightweight and highly effective microwave absorption," Nanotechnology, 31[41] 414001 (2020).
21. J. Wang, J. Yang, J. Yang, H. Zhang, D. Zhang, H. Wang, and R. Wang, "CNT/Cu2O heterojunction via self-assembly technology for emerging flexible photodetectors," Journal of Materials Science-Materials in Electronics, 31[8] 5892-99 (2020).
22. D. Zhang, J. Yang, J. Wang, J. Yang, and G. Qiao, "Construction of Cu2O-reduced graphene oxide composites with enhanced photoelectric and photocatalytic properties," Optical Materials, 100, UNSP 109612 (2020).
23. H. Zhang, J. Wang, and J. Yang, "Fluorine-induced in situ crystallization route to mesoporous Li2Si2O5 hydrate dumbbell-like structures," Boletin De La Sociedad Espanola De Ceramica Y Vidrio, 59[2] 88-92 (2020).
24. H. Zhang and J. Yang, "Hollow Li2SiO3 architectures with tunable secondary nanostructures and their potential application for the removal of heavy metal ions," Journal of Materials Science, 55[9] 3845-59 (2020).
25. 李紫璇，郝留成，张建飞，周小楠，黄 鑫，史忠旗，杨建锋，王 波，前驱体法合成氮化铝纳米材料及其生长机制，硅酸盐学报，48[6] 787-793 (2020)
26. 王佩，曾德军，王波，史卓涛，杨建锋，无机盐/莫来石复合相变储能材料的制备与性能研究, 冶金与材料, 40[4], 10-12(2020)
27. 侯宝强，郭海霞，朱宇璇，王波，杨建锋，莫来石含量及粒径对铜铁基复合材料摩擦学性能的影响，硅酸盐学报，48[6] 794-802 (2020)
28. 李紫璇，丁克，郝留成，袁端鹏，杨建锋，王波，特高压气体绝缘金属封闭开关设备用Al2O3/环氧树脂复合材料的非等温固化动力学及蠕变性能，复合材料学报，37 [03] 562-572 (2020)
29. 王阳阳，贾晨，贾先，袁媛，杨建锋，一维碳化硅纳米材料的研究，高科技纤维与应用，[2] 49-51 (2020)

2019年

30. Jinxiao Wang, Jianfeng Yang, Dening Zou, Jun Yang, Guanjun Qiao, Hang Wang, Ruihu Wang, Tailor-made photonic crystal fiber sensor for the selective detection of formaldehyde and benzene, OPTICAL FIBER TECHNOLOGY, 52, 101941 (2019)
31. Jian-Fei Zhang, Xiao-Nan Zhou, Xin Huang, Liu-Cheng Hao, Qiang Zhi, Zi-Xuan; Bao-Qiang Hou, Jian-Feng Yang, Bo Wang, Kozo Ishizaki, Biomorphic Cellular Silicon Carbide Nanocrystal-Based Ceramics Derived from Wood for Use as Thermally Stable and Lightweight Structural Materials, ACS APPLIED NANO MATERIALS, 2[11] 7051-7060 (2019)
32. Yuchen Deng, Yaming Zhang, Nanlong Zhang, Qiang Zhi, Bo Wang, Jianfeng Yang, Preparation and characterization of pure SiC ceramics by high temperature physical vapor transport induced by seeding with nano SiC particles. Journal of Materials Science & Technology 35, 2756–2760 (2019)
33. Hui Zhang, Jinxiao Wang and Jianfeng Yang, Anisotropic growth and photoluminescence of Li2Si2O5 hydrate rods, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 30 [18] 17405-17411(2019)
34. Bobo Liu and Jianfeng Yang, Mg on adhesion of Al(111)/3C-SiC(111) interfaces from first principles study, JOURNAL OF ALLOYS AND COMPOUNDS, 791, 530-539 (2019)
35. Liu-Cheng Hao, Zi-Xuan Li, Fan Sun, Ke Ding, Xiao-Nan Zhou, Zhong-Xiao Song, Zhong-Qi Shi, Jian-Feng Yang, Bo Wang, High-performance epoxy composites reinforced with three-dimensional Al2O3 ceramic framework, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 127, UNSP 105648 (2019)
36. Qiang Zhi, Bo Wang, Shan Zhao, Zhao Zhang, Yu-Chen Deng, Nan-Long Zhang, Jian-Feng Yang, Synthesis and mechanical properties of highly porous ultrafine-grain Si3N4 ceramics via carbothermal reduction-nitridation combined with liquid phase sintering, CERAMICS INTERNATIONAL, 45 [17] 21359-21364 (2019)
37. Chang-Yeoul Kim, Thi My Linh Dang, Yarning Zhang, Jian-Feng Yang, Bo Wang, The alignment of AlN platelets in polymer matrix and its anisotropic thermal properties, JOURNAL OF MATERIOMICS, 5 [4] 679-687 (2019)
38. 唐健江, 刘波波, 杨建锋，纳米碳化硅的重结晶对多孔碳化硅陶瓷制备的影响，粘接，8-11 (2019)
39. 周小楠，张建飞，黄鑫，智强，杨建锋，王波，多孔重结晶碳化硅陶瓷的烧结颈结构调控与力学性能，硅酸盐学报，47 [9] 1208-1213 (2019)
40. 朱宇璇, 智强, 王波, 杨建锋, 顾士甲, 张国军，α-Si3N4 粉体原料对多孔氮化硅陶瓷微观组织和力学性能的影响, 硅酸盐学报，47 [9] 1254-1260 (2019)
41. 王阳阳, 贾晨, 贾先, 杨建锋, 碳化硅晶须增韧复合材料的研究现状, 兵器材料科学与工程，42[4] 142-146 (2019)
42. 王阳阳, 贾晨, 杨建锋, 贾先,高铬铸铁的冲蚀磨损性能研究,热加工工艺，48[4] 63-66 (2019)
43. Nan-Long Zhang, Jian-Feng Yang, Yu-Chen Deng, Bo Wang, Ping Yin. Preparation and properties of reaction bonded silicon carbide (RB-SiC) ceramics with high SiC percentage by two-step sintering using compound carbon sources, CERAMICS INTERNATIONAL, 45 [12] 15715-15719 (2019)
44. Yuchen Deng, Yaming Zhang, Nanlong Zhang, Qiang Zhi, Bo Wang, Jianfeng Yang. High Thermal Conductivity of Pure Dense SiC Ceramics Prepared via HTPVT, Functional Materials Letters, 12 (3) 1950032 (2019)

2018年

45. 赵杉, 张建飞, 刘虎林, 杨建锋, 王波, 碳热还原结合重结晶制备多孔SiC陶瓷及其力学性能， 中国科技论文，13[10]1194-1198 (2018)
46. 唐健江, 刘波波, 杨建锋, 白俊春, 3MOCVD 生长高质量 InGaN/AlGaN MQW 紫光 LED 的研究，科技视界，177-178(2018)
47. Yaming Zhang, Haixia Guo, Hui Zhang, Yuchen Deng, Bo Wang and Jianfeng Yang, Effect of Added Mullite Whisker on Properties of Lithium Aluminosilicate (LAS) Glass-Ceramics Prepared for Dental Restoration, JOURNAL OF BIOMEDICAL NANOTECHNOLOGY, 14[11] 1944-1952 (2018)    IF=5.068
48. Yaming Zhang, Haixia Guo, Bo Wang and Jianfeng Yang, Effect of ZrO2 and MgO doping on microstructure and properties of translucent alumina fabricated by rapid vacuum sintering, FUNCTIONAL MATERIALS LETTERS, 11[5: SI] 1850040 (2018)    IF=1.084
49. Haixia Guo, Biaoqiang Hou, Yaming Zhang, Bo Wang and Jianfeng Yang, Influence of Fe and Al2O3 Addition on the Mechanical and Tribological Properties of Cu-Based Composites, SCIENCE OF ADVANCED MATERIALS, 10[8] 1100-1104 (2018)    
50. Jinxiao Wang, Jun Yang, Ning Han, Jianfeng Yang, Acetone Gas Sensing Properties of Au-activated Ni-doped ZnO Nanoparticles Prepared by Coprecipitation Method, RARE METAL MATERIALS AND ENGINEERING, 47[6] 1682-1688 (2018)
51. Yaming Zhang, Dejun Zeng, Bo Wang and Jianfeng Yang, Effect of heating parameters on sintering behaviors and properties of mullite whisker frameworks, NANOTECHNOLOGY, 29 (16) 164001, 2018      
52. Jinxiao Wang, Jianfeng Yang, Jun Yang, Guanjun Qiao, Hang Wang,  WangRui Hu，Superior MoS2-decorated CNT composite materials for photoelectric detectors，Optical Materials 86, 113–118 (2018)  

2017年

53. 于方丽, 杨建锋, 白宇, 基于多孔Si3N4陶瓷基底BN涂层制备与表征, 中 国陶瓷,53 [8] 11-15(2017)
54. 高昌乐, 王子敬, 刘凯凯, 王旭东, 杨建锋, 王 波，两步常压烧结工艺对氧化铝陶瓷制备及性能的影响,铸造技术, 06，1269-1273 (2017)
55. Jinxiao Wang, Zheng Xie, Yuan Si, Xinyi Liu, Xinyuan Zhou, Jianfeng Yang, Peng Hu, Ning Han, Jun Yang and Yunfa Chen, Ag-Modified In2O3 Nanoparticles for Highly Sensitive and Selective Ethanol Alarming, Sensors, 17[10], 2220 (2017)
56. Qiang Zhi, Zhaoyun Xu, Huan Pan, Jianfeng Yang, Yuchen Deng, and Bo Wang, Fabrication and strengthening of porous Si3N4 ceramics by replacement of oxide phase with Si3N4 at grain boundary through carbothermal nitridation, JOURNAL OF MATERIALS RESEARCH, 32[17], 3344-3352 (2017)
57. Jinxiao Wang, Jun Yang, Ning Han, Xinyuan Zhou, Shuyan Gong, Jianfeng Yang, Peng Hu, Yunfa Chen, Highly sensitive and selective ethanol and acetone gas sensors based on modified ZnO nanomaterials, MATERIALS & DESIGN, 121, 69-76 (2017)
58. Xiao Zhang, Sen Liang, Haibo Li, Jianfeng Yang, Mechanical and optical properties of transparent alumina obtained by rapid vacuum sintering, CERAMICS INTERNATIONAL, 43 [1], 420-426 (2017)

2016年

59. Shao-Chun Xu, Nan-Long Zhang, Jian-Feng Yang, Bo Wang, Chang-Yeoul Kim, Silicon carbide-based foams derived from foamed SiC-filled phenolic resin by reactive infiltration of silicon, CERAMICS INTERNATIONAL, 42[13] 14760–14764 (2016)
60. Dejun Zeng, Haihong Zhang, Jianfeng Yang, Bo Wang, Xiaolin Zhang, Microstructure and property of porous mullites with a whiskers framework obtained by a sol–gel process, Ceramics International, 42[9] 11270–11274 (2016)
61. De-Jun Zeng, Ya-Ming Zhang, Jian-Feng Yang, Bo Wang, and Junichi Matsushita, Fabrication and Property of Mullite Whiskers Frameworks with an Ultrahigh Porosity by Expandable Mesocarbon Microbeads, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 99[7] 2226-2228 (2016)
62. Xinghua Yang, Jianguang Bai, Wenjia Jing, Bo Wang, Jianfeng Yang, Strengthening of low-temperature sintered vitrified bond cBN grinding wheels by pre-oxidation of cBN abrasives, Ceramics International, 42 [7] 9283–9286 (2016)
63. Yaming Zhang, Haihong Zhang, Jianfeng Yang and Gangqiang Ge, Erosion Resistance and Interface Properties of Epoxy Composite Filled With Graded Silicon Carbide, POLYMERS & POLYMER COMPOSITES, 24 [2] 161-166 (2016)

2015年

64. Zhang H, He ZL, Zhang YM, Jing WJ, Wang B, Yang JF. Lithium disilicate glass-ceramics by heat treatment of lithium metasilicate glass-ceramics obtained by hot pressing [J]. Journal of the American Ceramic Society. 2015, 98(2): 3659-3662. (SCI: 000368076500011)
65. Yi Qin, Ting Zhao, Bo Wang, Jian-Feng Yang, Deposition Time Dependent Size of Si Quantum Dots Embedded in Amorphous SiC Matrix, Journal of Nanoscience and Nanotechnology, 15 [9] 7346-7350 (2015) 
66. Dejun Zeng, Haihong Zhang, Bo Wang, Kezheng Sang, and Jianfeng Yang, 
Effect of Ammonia Concentration on Silica Spheres Morphology and Solution Hydroxyl Concentration in
Stober Process,
Journal of Nanoscience and Nanotechnology, 15[9] 7407-7411 (2015) 
67. Ting Zhao, Yi Qin, Bo Wang, and Jian-Feng Yang, Comparative Study of Hydrogen and Argon Dilution Effects in Amorphous SiC Thin Films Deposited by 
Plasma Enhanced Chemical Vapor Deposition, 
Journal of Nanoscience and Nanotechnology, 15, 7371-7375 (2015) 
68. HaiHong Zhang, YaLi Xu, Bo Wang, Xiao Zhang, Jianfeng Yang, Koichi Niihara, Effects of heating rate on the microstructure and mechanical properties of rapid vacuum sintered translucent alumina, CERAMICS INTERNATIONAL, 41[9] 12499-12503 (2015)
69. Yingying Zhao, Hongyan Xia, Rui Tang, Zhongqi Shi, Jianfeng Yang, Jiping Wang, A low cost preparation of C/SiC composites by infiltrating molten Si into gelcasted pure porous carbon preform, CERAMICS INTERNATIONAL, 41[5] 6478-6487 (2015)
70. Haihong Zhang, Yaming Zhang, Bo Wang, Jianfeng Yang, Preparation and characterization of continuous alumina based fiber reinforced with orientated mullite whisker, CHEMICAL ENGINEERING JOURNAL, 268, 109-115 (2015)
71. Bo Wang, Zhao-Yun Xu, Feng Jin, Jian-Feng Yang, Kozo Ishizaki, Synthesis of rod-like beta-Si3N4 seed crystals with tailored morphology, CERAMICS INTERNATIONAL, 41[4] 5348-5354 (2015)
72. 鲁元，杨建锋，李京龙，李鹏，Yuan LU, Jianfeng Yang, Jinglong LI, Peng LI, 挤压铸造法制备双连续氮化钛增强铝基复合材料, 硅酸盐学报, 43[4] 1-6 (2015)
73. 鲁 元, 李京龙, 杨建锋, 李 鹏, Yuan Lu, Jing-Long Li, Jian-Feng Yang, Peng Li, 热处理温度对双连续β-氮化硅增强铝基复合材料性能的影响(Effects of Heat-treatment Temperature on Properties of Co-continuous beta-Si3N4 Reinforced Al Matrix Composites), 无机材料学报(JOURNAL OF INORGANIC MATERIALS), 30 [3] 277-281 (2015)
74. Bo Wang, Hui Zhang, Hoang-Tuan Phuong, Feng Jin, Jian-Feng Yang, Kozo Ishizaki, Gas permeability and adsorbability of the glass-bonded porous silicon carbide ceramics with controlled pore size, CERAMICS INTERNATIONAL, 41[2] 2279-2285 (2015)
75. Ting Zhao, Yi Qin, Bo Wang, Jian-Feng Yang, Improved densification and properties of pressureless-sintered lithium disilicate glass-ceramics, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 620, 399-406 (2015)
76. 牛永辉; 杨军; 朱浪涛; 杨建锋; 白宇，超音速等离子喷涂ZrO2 -MoSi2涂层的组织及耐磨性能，金属热处理, 40 [8] 83-87 (2015)
77. 徐照芸; 王波; 杨建锋; 赵中坚; 胡伟; 施志伟, Si3N4的氧化预处理对浆料流变性及多孔陶瓷性能的影响(Effects of oxidation treatment of Si3N4 on rheology of aqueous suspensions and properties of porous Si3N4 ceramic), 科学通报(Chinese Science Bulletin),  60[3] 309-315 (2015)
78.  鲍崇高; 宋奕侨; 侯书增; 杨兴化; 杨建锋; 姚文静, 磨料表面微氧化对cBN磨具磨削性能的影响(Effect of the cBN Grit Surface Oxidation on Grinding Performance of the Vitrified cBN Tool), 西安交通大学学报(Journal of Xi'an Jiaotong University), 49[2] 124-129 (2015)
79. Kuo Zhang, Zhongqi Shi, Hongyan Xia, Ke Wang, Guiwu Liu, Guanjun Qiao, Jianfeng Yang, Preparation and thermophysical properties of directional SiC/Cu-Si composite via spontaneous infiltration, Ceramics International, 42[1] 996-1001 (2015)

2014年

80. Jianguang Bai, Xinghua Yang, Shaochun Xu, Wenjia Jing, Jianfeng Yang, Preparation of foam glass from waste glass and fly ash, MATERIALS LETTERS, 136, 52-54 (2014)
81. Zhaoyun Xu, Bo Wang, Jianfeng Yang, Zhongjian Zhao, Preparation of Porous Si3N4 Ceramics with Controlled Porosity and Microstructure by Fibrous alpha-Si3N4 Addition, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 97[11] 3392-3395 (2014)
82. Pei Zhang, Xinghua Li, Jianfeng Yang, Shaochun Xu, Effect of heat treatment on the microstructure and properties of lithium disilicate glass-ceramics, JOURNAL OF NON-CRYSTALLINE SOLIDS, 402, 101-105 (2014)
83. Wanli Yang, Zhongqi Shi, Hailong Wang, Guanjun Qiao, Yongfeng Li, Jianfeng Yang, Zhihao Jin, Effects of ZrO2 on the Nitridation Behavior and Mechanical Properties of Reaction-Bonded Si3N4/h-BN Composite, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 23[10] 3436-3443 (2014)
84. 赵婷、秦毅、吴桐、王波、杨建锋，Effect of Particle Size on the Sintering Behavior, Microstructure and Flexural Strength of Lithium Disilicate Glass-Ceramics, 稀有金属材料与工程, 2014,43(Z1): 24-28 (2014)
85. Ting Zhao, Yi Qin, Pei Zhang, Bo Wang, Jian-Feng Yang, High-performance, reaction sintered lithium disilicate glass-ceramics, CERAMICS INTERNATIONAL, 40[8] 12449-12457 (2014)
86. 张俊禧，徐照芸，王波，秦毅，杨建锋，赵中坚，胡伟，施志伟，氮气压力对多孔氮化硅陶瓷显微组织和力学性能的影响, 无机材料学报, 29[7] 701-705 (2014)
87. 秦毅，赵婷，王波，杨建锋，PECVD沉积和原位退火时间对h-BN薄膜组成及光学带隙的影响，无机材料学报， 29[7] 729-734 (2014)
88. Bo Wang, Zhao-Yun Xu, Wei-Zhong Lu, Feng Jin, Jian-Feng Yang, Koichi Niihara, Effect of porous Si3N4 preform on the mechanical properties of Si3N4/Al composites with interpenetrating network structure， MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 607, 307-312 (2014)
89. Bo Wang, Yi Qin, Feng Jin, Jian-Feng Yang, Kozo Ishizaki, Pulse electric current sintering of cubic boron nitride/tungsten carbide-cobalt (cBN/WC-Co) composites: Effect of cBN particle size and volume fraction on their microstructure and properties, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 607, 490-497 (2014)
90. Pei Zhang, Xinghua Li, Jianfeng Yang, Shaochun Xu, The crystallization and microstructure evolution of lithium disilicate-based glass-ceramic， Journal of Non-Crystalline Solids, 392, 26-30 (2014)
91. Kezheng Sang, Jianfeng Yang, Wenpeng Shi, Hongyang Sun, Preparation of coatings on alumina ceramic for wettability, Ceramics International, 40[4] 5659-5663 (2014)
92. Bo Wang, Shao-Chun Xu, Feng Jin, Jian-Feng Yang, Kozo Ishizaki, Koichi Niihara, Effect of LiAlSiO4 particle size on the properties of LAS/SiC porous ceramics with near zero thermal expansion, Ceramics International, 40[2] 2853-2856 (2014)
93. Haihong Zhang, Dejun Zeng, Bo Wang, Jian-Feng Yang, Preparation and characteristics of spinnable sol and continuous mullite fibers with nano silica addition, Journal of Sol-Gel Science and Technology, 69[2] 311-319 (2014)
94. Haihong Zhang, Yong Hang, Yi Qin, Jian-Feng Yang, Bo Wang, Synthesis and characterization of sol-gel derived continuous spinning alumina based fibers with silica nano-powders, Journal of the European Ceramic Society, 34[2] 465-473 (2014)
95. Yi Qin, Ting Zhao, Bo Wang, Pengxiang Zhang, Jianfeng Yang, Development of a transverse thermoelectric voltage effect in artificial SrTiO3/SrTi1-xNbxO3 epitaxial multilayer films with incline-oriented sublayers, Crystengcomm, 16[24] 5345-5351 (2014)
96. Wang, Bo; Yang, Xing-Hua; Zeng, De-Jun; Jian-Feng Yang, Kozo Ishizaki, Koichi Niihara, Effect of glassy bonding materials on the properties of LAS/SiC porous ceramics with near zero thermal expansion, Journal of the European Ceramic Society, 34[1] 97-101 (2014)
97. 桑可正，韩璐，史文鹏，杨建锋，氧化铝陶瓷表面化学气相沉积钛涂层的制备及性能，《硅酸盐学报》2014,42(7):836-840
98. 刘娟娟，桑可正，韩璐，杨建锋，Al2O3陶瓷表面化学气相沉积Ni涂层及其与Cu润湿性，《硅酸盐学报》2014,42(4):397-401

2013年

99.  Zhao, L.; Bai, Y.; Tang, J. J.; Liu, K; Ding, C. H; Yang, J. F.; Han, Z. H. Effect of particle in-flight behavior on the composition of thermal barrier coatings, Applied Surface Science, 286, 184-191 (2013)
100. Zhang Xiao; Lu Lingtao; Yang Jianfeng; et al. Effect of the Sealing Process on the Structure and Mechanical Properties of Ceramic-Metal Sealing Fitting, Rare Metal Materials and Engineering: 42 [1] 145-148 (2013)
101. Yonggui Shi, Xinghua Yang, Dong Wang, Peng Zhang, Jincheng Zhang, Yue Hao, Jianfeng Yang. Enlargement of Silicon Carbide Lely Platelet by Physical Vapor Transport Technique, Materials and Manufacturing Processes, 28 [11] 1248-1252 (2013)
102. Sen Liang, Xiao Zhang, Haibo Li, Min Luo, Jin Li, Lijun He, Jianfeng Yang. Fabrication and characterization of Ni-Mn-Si-Al-O NTC thermistor and its application as temperature wire sensor, Functional Materials Letters, 6 [4] 1350039 (2013)
103. Jianguang Bai, Xinghua Yang, Shaochun Xu, et al. Fabrication of highly dense Al2O3 ceramics, Scripta Materialia Volume: 68 Issue: 6 Pages: 393-395 Published: MAR 2013
104. Yuan Lu, Jian-Feng Yang, Jing-Long Li, Fabrication of Porous Silicon Nitride with High Porosity by Carbothermal Reduction-reaction Bonding, Journal of Inorganic Materials 28 [5] 469-473 (2013)
105. Yu Bai, Jianjiang Tang, Yanmei Qu, et al. Influence of original powders on the microstructure and properties of thermal barrier coatings deposited by supersonic atmospheric plasma spraying, Part I: Microstructure, Ceramics International, 39 [5] 5113-5124 (2013)
106. Yu Bai, Lei Zhao, Jianjiang Tang, et al. Influence of original powders on the microstructure and properties of thermal barrier coatings deposited by supersonic atmospheric plasma spraying, part II: Properties, Ceramics International, 39[4] 4437-4448 (2013)
107. Fang-Li Yu, Yu Bai, Yi Qin, et al. Influence of Substrate Temperature on the Morphology, Composition and Growth Rate of SiC Films Deposited by PECVD, Journal of Inorganic Materials, 28 [2] 201-206 (2013)
108. Yi Qin, Ting Zhao, Hai-Hong Zhang, Bo Wang, Peng-Xiang Zhan, Jian-Feng Yang. Large transverse thermoelectric voltage effect in incline-oriented SrTi1-xNbxO3 films with cubic structure, Applied Physics Letters, 102 [25] 253901 (2013)
109. Sen Liang, Xiao Zhang, Min Luo et al. Study of structural and electrical properties of Ni-Mn-Mg-AI-O NTC thermistor thick film prepared by SAPS method, Electronic Components & Materials, 32 [5] 26-9 (2013)

2012年

110. Rongzhen Liu, Guiwu Liu, Jianfeng Yang, Haiyun Jin, Yuan Lu, Wenwei Gu, Effect of removal of silicon on preparation of porous SiC ceramics following reaction bonding and recrystallization, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 552, 9-14 (2012)
111. Bo Wang, Koji Matsumaru, Jianfeng Yang, Zhengyi Fu, Kozo Ishizaki, The Effect of cBN Additions on Densification, Microstructure and Properties of WC-Co Composites by Pulse Electric Current Sintering, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 95(8), 2499-2503 (2012)
112. Qian Zhang, Litong Guo, Tianwen Guo, Jianfeng Yang, Influence of Sn on the adhesion between titanium and porcelain, MATERIALS LETTERS, 79, 300-302 (2012)
113. Jun Li, Jianfeng Yang, Guagjun Qiao, Effect of Bonding Temperature on Microstructure and Strength of W/CuCrZr Alloy Joints Diffusion Bonded with a Ti Interlayer, RARE METAL MATERIALS AND ENGINEERING, 41(7) 1235-1238 (2012)
114. Yong-gui Shi, Pei-yun Dai, Jianfeng Yang, Zhi-hao Jin, Hu-lin Liu, Effect of 6H-SiC crystal growth shapes on thermo-elastic stress in the growing crystal, INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 19(7) 622-627 (2012)
115. Xiao Zhang, Sen Liang, Pei Zhang, Ting Zhao, Yu Bai, Chong-Gao Bao, Jianfeng Yang, Guan-Jun Qiao, Fabrication of Transparent Alumina by Rapid Vacuum Pressureless Sintering Technology, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 95(7) 2116-2119 (2012)
116. J. M. Li, J. Y. Yin, C. Cai, Z. Zhang, J. F. Li, Jianfeng Yang, M. Z. Xue, Y. G. Liu, Corrosion behavior of nanostructured Ni-Si3N4 composite films: A study of electrochemical impedance spectroscopy, MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 63 (7) 620-626 (2012)
117. Jianguang Bai, Xinghua Yang, Yonggui Shi, Shaochun Xu, Jianfeng Yang, Fabrication of directional SiC porous ceramics using Fe2O3 as pore-forming agent, MATERIALS LETTERS, 78, 192-194 (2012)
118. Yonggui Shi, Jianfeng Yang, Hulin Liu, Peiyun Dai, Bobo Liu, Zhihao Jin, Guanjun Qiao, Hailiang Li, Fabrication and mechanism of 6H-type silicon carbide whiskers by physical vapor transport technique, Journal of Crystal Growth, 349[1] 68-74 (2012)
119. Bo Wang, Koji Matsumaru, Jianfeng Yang, Zhengyi Fu, Kozo Ishizaki, Mechanical behavior of cellular borosilicate glass with pressurized Ar-filled closed pores, ACTA MATERIALIA, 60(10) 4185-4193 (2012)
120. Chao Cai, Zhao Zhang, Zhong-ling Wei, Jianfeng Yang, Jin-feng Li, Electrochemical and corrosion behaviors of pure Mg in neutral 1.0% NaCl solution, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 22(4) 970-976 (2012)
121. Qiongxi Liu, Jianfeng Yang, The Ultimate Stress of Small Grain Shellproof Ceramic Composite, FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE II, PTS 1-6, Applied Mechanics and Materials, 121-126, 524-528 (2012)
122. Yu Bai, Fang Li Yu, Soo Wohn Lee, Huang Chen, Jianfeng Yang, Characterization of the Near-Eutectic Al2O3-40wt% ZrO2 Composite Coating Fabricated by Atmospheric Plasma Spray. Part II: Microstructure and Mechanical Properties of Nanocomposite Coating, MATERIALS AND MANUFACTURING PROCESSES, 27(1) 58-64 (2012)
123. Yonggui Shi, Peiyun Dai, Jianfeng Yang, Zhihao Jin, Jikuan Cheng, Hulin Liu, Effects of Grain Size of Source Material on Growing 6H-SiC Bulk Crystal by Physical Vapor Transport, MATERIALS AND MANUFACTURING PROCESSES, 27(1) 84-87 (2012)
124. Jian Zhang, Jun Yang, Langtao Zhu, Zhihai Han, Jianfeng Yang, Yu Bai, Microstructure and thermal shock resistance of Cr2O3 ceramic coatings deposited by supersonic atmosphere plasma spraying,Journal of the Chinese Ceramic Society, 40[9] 1356-1362 (2012)
125. Chang Chen, Dongping Tian, Jianfeng Yang, Guanjun Qiao, Tingshu He, Yonghua Wu, High-temperature performance of porous Fe-Cr-Ni matrix composites reinforced with nano-particles of Al2O3,Journal of the Chinese Ceramic Society, 40 [7] 1040-1045 (2012)
126. Fang-Li Yu, Yu Bai, Jun Du, Huan-Rui Wang, Jianfeng Yang, Study on the microstructure, mechanical properties and gas permeability of porous Si3N4 ceramics, Journal of Synthetic Crystals, 41 [3] 656-660 (2012)

2011年

127. Bai, Yu, Jian Feng Yang, and S.W. Lee. “Optimization of Alumina Slurry Properties and Drying Conditions in the Spray Drying Process and Characterization of Corresponding Coating Fabricated by Atmospheric Plasma Spray.” Key Engineering Materials 484 (July 2011): 158–65.
128. J. Li, J.-F. Yang, J.-L. Chen, “High heat load properties of actively cooled W/CuCrZr mock-ups by diffusion bonding with Ni or Ti interlayer”, Fusion Engineering and Design, 86 [12] 2874-2878 (2011)
129. C. Chen, C. Y. Chu, J.F Yang, C. G. Bao, G. J. Qiao, D. P. Tian, B. Wang, K. Ishizaki, K. Niihara, “Effect of raw materials on microstructure and bending strength of porous in situ MgO/Fe-Cr-Ni composites”, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 528 [29-30] 8438-8442 (2011).
130. J. Li, J.-F. Yang, J.-L. Chen, High heat load properties of actively cooled W/CuCrZr mock-ups by cladding and diffusion bonding with a two-step process, Journal of Nuclear Materials, 418 [1-3] 110-114 (2011).
131. S. Liang, J.F Yang, X. Zhang, Y. Bai, “The Thermal-Electrical Properties of Polyvinyl Alcohol/AgNO(3) Films”, Journal of Applied Polymer Science, 122[2] 813-818 (2011)
132. S. Liang, X. Zhang, Y. Bai, Z. H. Han, J.F Yang, “Study on the preparation and electrical properties of NTC thick film thermistor deposited by supersonic atmospheric plasma spraying”, Applied Surface Science, 257[23] 9825-9829 (2011)
133. P. Y. Dai, Y. Z. Wang, G. L. Liu, B. Wang, Y. G. Shi, J. F. Yang, G. J. Qiao and H. J. Wang, “Fabrication of Highly Dense Pure SiC Ceramics via the HTPVT Method”, Acta Materialia, 59[16] 6257-6263 (2011)
134. S. Liang, J. F Yang, X. H. Yi, X. Zhang, Y. Bai, An efficient way to improve the electrical stability of Ni(0.6)Si(0.2)Al(0.6)Mn(1.6)O(4) NTC thermistor, Ceramics International, 37[7] 2537-2541 (2011)
135. C. Cheng, J. F Yang, C. Y. Chu, G. J. Qiao, C. G. Bao, “Porous nano-Al(2)O(3)/Fe-Cr-Ni composites fabricated by pressureless reactive sintering,” Materials Chemistry and Physics, 128[1-2] 24-27 (2011)
136. Y. Bai, Z.H. Han, H. Q. Li, C. Xu, Y. L. Xu, Z. Wang, C. H. Ding, J. F.Yang   “High performance nanostructured ZrO2 based thermal barrier coatings deposited by high efficiency supersonic plasma spraying”, Applied Surface Science，257[16] 7210-7216 (2011)
137. P. Y. Dai, Y. G. Shi, J. F. Yang, Y. Z. Wang, J. K. Cheng and H. J. Wang, “Restraint of Nucleation of SiC Polycrystals Surrounding the Seed during SiC Single Crystal Growth”, Journal of Materials Science,46[13] 4618-4621 (2011)
138. H. B. Tan, Y. P. Ding, J. F. Yang, “Activation energy of mullite crystallisation from precursor fibres determined by differential scanning calorimetry”, Materials Science and Technology, 27 [5] 933-936 (2011)
139. G. L. Liu, P. Y. Dai, Y. Z. Wang, J. F. Yang and Y. B. Zhang, “Fabrication of Wood-like Porous Silicon Carbide Ceramics without Templates”, Journal of the European Ceramic Society, 31[5] 847-854 (2011)
140. Z. C. Zhan, P. Zhang, L.T Guo, T.W. Guo, J.F. Yang, “Effect of TiO2-SiO2 sol-gel coating on the cpTi-porcelain bond strength”  Materials Letters, 65[7] 1082-1085(2011)
141. Y. Bai, Z.H. Han, H.Q. Li；C. Xu, Y.L Xu, C.H Ding, J. F. Yang, “Structure-property differences between supersonic and conventional atmospheric plasma sprayed zirconia thermal barrier coatings” Surface and Coatings Technology，205[13-14] 3833-3839 (2011)
142. G. L. Liu, P. Y. Dai, Y. Z. Wang, J. F. Yang and G. J. Qiao: “Fabrication of Pure SiC Ceramic Foams Using SiO₂ as a Foaming Agent via High-Temperature Recrystallization”, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 528 [6] 2418-2422 (2011)
143. C. Chen, J. F. Yang, C.Y. Chu, “Effect of MgO content on the microstructure and mechanical properties of Fe-Cr-Ni/MgO composites produced by reactive hot pressing” Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 528 [6] 2995-2998 (2011)
144. C. Cai, X.B. Zhu, G.Q. Zheng, Y.N. Yuan, X.O. Huang, F.H. Cao, J. F. Yang Z. Zhang,“Electrodeposition and characterization of nano-structured Ni-SiC composite films” Surface and Coatings Technology, 205[11] 3448-3454 (2011)
145. H.B .Tan, Y. B. Zhang, Y.P. Ding, J. F. Yang “Preparation of mullite fibres by sol-gel processes using aluminium carboxylates and tetraethylorthosilicate” Materials Science and Technology, 27 [2] 568-572(2011)
146. Y.B. Zhang, C.F. Xiao, S.L. An, J.F. Yang, “A morphological study of mullite long fiber prepared using polyvinyl butyral as spinning aids”,  Journal of Sol-Gel Science and Technology, 57[2] 142-148 (2011)
147. Jin Haiyun, Huang Yinmao, Feng Dawei, He Bo, Yang Jianfeng, Oxidation Behavior of AlN/h-BN Nano Composites at High Temperature, Conference Series-Materials Science and Engineering, (3rd International Congress on Ceramics (ICC3) 会议地点: Osaka, JAPAN 会议日期: NOV 14-18, 2010) 卷: 18 文献号: 202022DOI: 10.1088/1757-899X/18/20/202022 出版年: 2011
148. H.B. Tan, Y. P. Ding, J. F. Yang, “Synthesis and Characterization of Rich Silica Mullite Fibers by Sol-Gel Method Using Aluminum Lactate and Silica Sol”, Advanced Composite Materials, 20[5] 477-486 (2011)
149. Y.B. Zhang, Y.P. Ding, Y. Li, J.Q. Gao, J. F. Yang, L.T. Guo, “Mullite Fibers Prepared by Sol-Gel Method Using Aluminum Chloride Aluminum Isopropoxide and Tetraethylorthosilicate” Materials and Manufacturing Processes, 26[4] 649-653 (2011)
150. Y. Bai, S.W. Lee, H. Chen, F.L. Yu, J. F. Yang “Characterization of the Near-Eutectic Al2O3-40wt% ZrO2 Composite Coating Fabricated by Atmospheric Plasma Spray. Part I: Preparation and Characterization of Nano Al2O3-ZrO2 Powder Using Sol-Gel Method”, Materials and Manufacturing Processes, 26[2]330-337 (2011)
151. Y.B. Zhang, Y.P. Ding, Y. Li, J.Q. Gao, J.F. Yang, L.T. Guo, “Synthesis and characterisation of alumina fibres using organic/inorganic composite sol” Materials Science and Technology, 27[1] 264-267 (2011)
152. 王伟, 薛涛, 金志浩, 杨建锋, 乔冠军, 液态硅浸渍反应和混合酸(HNO3+HF)刻蚀制备多孔SiC陶瓷, 稀有金属材料与工程, 40(1) 138-141 (2011)
153. 于方丽, 白宇, LEE Soowohn, 杨建锋, 纳米Al2O3-ZrO2涂层的制备与微观结构, 硅酸盐学报, 39(8) 151-156 (2011)
154. 于方丽， 白宇， 杜军， 于平平， 王俭志，杨建锋，β-Si3N4晶种的制备、性能与机理研究, 人工晶体学报, 40(6),1595-1601 (2011)
155. 于方丽， 于平平， 王俭志，杨建锋，烧结助剂及β-Si3N4添加量对多孔氮化硅陶瓷性能的影响，人工晶体学报，40(3) 772-783 (2011)
156. 史永贵， 戴培赟，杨建锋， 刘光亮，物理气相传输(PVT)法生长碳化硅的晶体形态热应力分析,西安交通大学学报, 45(1) 117-121 (2011)

2010年

157. F.L. Yu, H.R. Wang, Y. Bai, J.F. Yang, Preparation and characterization of porous Si3N4 ceramics prepared by compression molding and slip casting methods, BULLETIN OF MATERIALS SCIENCE,33[5 ] 619-624(2010)
158. F.L. Yu, J.F. Yang, Delsing, ACA,. Preparation, characterization and luminescence properties of porous Si3N4 ceramics with Eu2O3 as sintering additive JOURNAL OF LUMINESCENCE, 130 [12] 2298-2304 (2010)
159. Y .Lu, J.F. Yang, W.Z.Lu, Synthesis of Porous Silicon Nitride Ceramics from Diatomite MATERIALS AND MANUFACTURING PROCESSES  25[9]998-1000(2010)
160. H.W. Li, H.Y. Jin, Q. Zhang, J.F. Yang, Z.H. Jin, SiC/C machinable ceramics surface hardening by silicon infiltration SCRIPTA  MATERIALIA 63[12]1177-1180(2010)
161. Y.B .Zhang, C.F. Xiao, S.L. An, J.F. Yang, S.J. Xu, Characterization of Defects of Mullite Fibers Prepared by Polyvinyl Butyral as Spinning Aid SCIENCE OF SINTERING,42[2] 203-210 (2010)
162. F.L. Yu, H.R. Wang, J.F. Yang, Effects of organic additives on microstructure and mechanical properties of porous Si3N4 ceramics BULLETIN OF MATERIALS SCIENCE, 33 [3] 285-291 (2010)
163. L.T. Guo, X.C Liu, J.Q. Gao, J.F. Yang, T.W. Guo, Y.B. Zhu, Effect of Surface Modifications on the Bonding Strength of Titanium-Porcelain MATERIALS AND MANUFACTURING PROCESSES, 25[8] 710-717 (2010)
164. Y. Lu, J.F. Yang, W.Z.Lu, The mechanical properties of co-continuous Si3N4/Al composites manufactured by squeeze casting  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527[23] 6289-6299 (2010)
165. H.B. Tan, Y.P. Ding, J.F. Yang, Mullite fibres preparation by aqueous sol-gel process and activation energy of mullitization JOURNAL OF ALLOYS AND COMPOUNDS,  492 [1-2] 396-40(2010)
166. G.P. Jiang, J. F. Yang, J.Q. Gao, Extrusion of porous silicon nitride using different binders JOURNAL OF CERAMIC PROCESSING RESEARCH  11 [1]126-128 (2010)
167. H.B. Tan, Y.P. Ding, J. F. Yang, Mullite fibers prepared from an inorganic sol-gel precursor, JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 53 [2] 378-383 (2010)
168. Y.F. Li, P. Liu, X.D. Wang, H.Y. Jin, J. F. Yang, G.J. Qiao, Interface structure and formation mechanism of BN/intergranular amorphous phase in pressureless sintered Si3N4/BN composites, SCRIPTA MATERIALIA  63[2]185-188 (2010)

169. H. B. Tan, Y. P. Ding, J. F. Yang, Mullite fibers prepared from an inorganic sol-gel precursor, J. Sol-Gel Sci. Technol., 53[2] 378-383(2010)

2009年

170. G.P. Jiang, J. F. Yang, J.Q. Gao Effect of starch on extrusion behaviour of ceramic pastes, Mater. Res. Innovations, 13[2] 119-123(2009)
171. B. Wang；J. Yang；R. Guo, G. J. Qiao, J. F. Yang, Microstructure characterization of hot-pressed beta-silicon nitride containing beta-Si3N4 seeds, Mater. Charact., 60[8] 894-899 (2009)
172. T. Jiang, H.Y. Jin, Z.H. Jin, G. J. Qiao and J. F. Yang, An investigation of the mechanical property and thermal shock behavior of machinable B4C/BN ceramic composites, J. Ceram. Process Res., 10[1]113-116(2009)
173.  Z.Q. Shi, J.P. Wang, G.J. Qiao, J. F. Yang and Z. H. Jin, Machinability, deformation, and cracks behavior of pressureless-sintered Al2O3/h-BN composites: role of weak boundary phases, J. Mater. Sci., 44[6]1580-1587 (2009)
174.  G.W. Liu, W. Li, G..J. Qiao, H. J. Wang, J. F. Yang, T.J. Lu, Microstructures and interfacial behavior of zirconia/stainless steel joint prepared by pressureless active brazing, J. Alloys Compd., 470[1-2] 163-167(2009)
175. 郭立童，刘啸晨，高积强，杨建锋，郭天文，钛表面的氧化对钛瓷结合强度的影响, 无机材料学报,  24[5] 915-918 (2009)
176. 谭宏斌, 杨建锋, 溶胶凝胶法制备莫来石纤维及莫来石晶化的动力学, 西安交通大学学报, 43[11] 43-46 (2009)
177. 于方丽，王欢锐，杨建锋，高积强，有机添加剂对多孔氮化硅陶瓷挤出成型工艺的影响, 中国科技论文在线, 4[3] 193-197 (2009)
178. Y. H. Zhang, Z.C. Xiao, J.P. Wang, J. F. Yang and Z. H. Jin, Effect of pyrocarbon content in C/C preforms on microstructure and mechanical properties of the C/C-SiC composites, Mater. Sci. Eng., A, 502 [1-2] 64-69 (2009)
179. B. Wang, J. Yang, R. Guo, J. Q. Gao and J. F. Yang, Microstructure and property enhancement of silicon nitride-barium aluminum silicate composites with beta-Si3N4 seed addition, J. Mater. Sci., 44[5]1351-1356 (2009)
180. F.L. Yu, J. F. Yang, J.Y. Ma, J. Du, Y. Q. Zhou, Preparation of nanosized CoAl2O4 powders by sol-gel and sol-gel-hydrothermal methods J. Alloys Compd., 468[1-2] 443-446 (2009)
181. Y.B. Zhang, Y.P. Ding, Y. Li, J. Q. Gao and J. F. Yang, Synthesis and characterization of polyvinyl butyral-Al(NO3)(3) composite sol used for alumina based fibers, J. Sol-Gel Sci. Technol., 49[3] 385-390(2009)
182. L.T. Guo, X.C. Liu, Z.Y. He, H. Zhang, J. Q. Gao, J. F. Yang and T. W. Guo, Surface modifications to improve Ti-porcelain bonding, J. Mater. Sci., 44[2] 502-509(2009)
183. B. Wang, J. Yang, R. Guo, J. Q. Gao and J. F. Yang, Microstructure and boundary phases of Lu-Al-doped silicon nitride by pressureless sintering, Mater. Sci. Eng., A, 500[1-2] 79-83(2009)
184. T. Jiang, Z. H. Jin, J. F. Yang, and J. Q. Gao, Investigation on the preparation and machinability of the B4C/BN nanocomposites by hot-pressing process, J. Mater. Process. Techno., 209[1] 561-571(2009)
185. F.L. Yu, J. F. Yang, Y.H. Xue, J. Du, Y. Lu and J.Q. Gao, “Effects of Talc and Clay Addition on Pressureless Sintering of Porous Si3N4 Ceramics”, Bull. Mater. Sci., 32[2] 177-181 (2009)
186. Y.H. Xue, Y. Lu, B. Wang, J. F. Yang, W.Z. Lu and J. Q. Gao, “Porous Silicon Nitride Ceramics Prepared by Reduction-nitridation of Diatomite”, Mater. Sci. Forum, 620-622, 753-756 (2009)
187. S.Y. Shan, Q.M. Jia, L.H. Jiang, Y.M. Wang and J. F. Yang, “Microstructure Control and Mechanical Properties of Porous Silicon Nitride Ceramics,” Ceram. Inter.,35[8] 3371-3374 (2009)
188. G.P. Jiang, J. F. Yang, J.Q. Gao and K. Niihara, “Characterization of Porous Silicon Nitride Ceramics Using Bentonite as Binder and Sintering Additive”,  Mater. Charact., 60[5] 456-460 (2009).
189. M. Luo, G. Y. Hou, J. F. Yang, J. Z. Fang, J. Q. Gao, L. Zhao and X. Li, “Manufacture of Fibrous Beta-Si3N4-reinforced Biomorphic SiC Matrix Composites for Bioceramic Scaffold Applications”, Mater. Sci Eng. C, 29[4] 1422-1427 (2009). 
190. R.Z. Liu, B. Wang, J.K. Cheng, J. F. Yang, J.Q. Gao. “A Novel Method for the Preparation of Porous SiC”, Mater. Sci. Forum, 620-622, 773-776 (2009) 
191. G.L. Liu, J.G. Bai, J. F. Yang, Fabrication of Clay Foam Ceramics Using Silicon Carbide and Ferric Oxide as Foaming Agents, Mater. Sci. Forum, 620-622, 777-780 (2009)
192. J.G. Bai, B. Wang, G..L. Liu, J.Q. Gao, J. F. Yang, J.Z. Zhao, Z. Li, Effect of SiC on Microstructures and Properties of Cordierite-mullite Multiphase Ceramics Material, Mater. Sci. Forum, 620-622, 33-36 (2009)
193. J. Li, X. Fang, J. F. Yang, J.Q. Gao, Influence of Different Interlayers Metals on Properties of Diffusion Bonding Joint of Tungsten to Copper Mater. Sci. Forum, 620-622, 65-68 (2009)
194. J. Liu, G.W. Fan, P.D. Han, JS Liu, J.Q. Gao, J. F. Yang, Effect of Nitrogen Content on the Hot Ductility During Hot Deformation of Stainless Steels, Mater. Sci. Forum, 620-622, 161-164(2009)
195. G.W. Fan, J. Liu, P.D. Han, G. J. Qiao, J. F. Yang, Effect of Warm Processing Parameters on the Precipitation of gamma '-phase in 2205 Duplex Stainless Steels, Mater. Sci. Forum, 620-622, 165-168(2009)
196. Zhang, YH, Xiao, ZC, J. F. Yang, Wang, JP, Z. H. Jin, Preparation of C/C-SiC Brake Materials with Low Cost and High Friction Performance, Mater. Sci. Forum, 620-622, 421-424 (2009)
197. R. Guo, B. Wang, J. Q. Gao, J. F. Yang, Preparation and Mechanical Properties of Carbon Nanotubes Reinforced Barium Aluminosilicate-silicon Nitride Composites, Mater. Sci. Forum, 620-622, 425-428(2009)
198. B. Wang, R. Guo, J. Q. Gao, J. F. Yang, Fabrication and Characterization of Barium Aluminum Silicate-Silicon Nitride Composites, Mater. Sci. Forum, 620-622,447-450(2009)
199. T. Jiang, Z. H. Jin, J. F. Yang, G. J. Qiao, Investigation of Microstructure and Machinability of the B4C/BN Composites, Mater. Sci. Forum, 620-622, 489-492 2009
200. C. Chen, J. F. Yang, J. Q. Gao, C.Y. Chu, Fabrication of Nano-MgO Reinforced Fe-Cr-Ni Composites by Reactive Hot Pressing, Mater. Sci. Forum, 620-622, 551-554(2009)
201. C. Cai, J.Y. Yin, Z. Zhang, J. F. Yang, The Electrodeposition of Nanostructured Ni-TiN Composite Films, Mater. Sci. Forum, 620-622, 727-730 (2009)
202. C. Cai, Q.P. Wang, Z. Zhang, J. F. Yang, Electrodeposition of Nanocrystalline CoNiFe Thin Films Prepared by Cyclic Voltammetry, Mater. Sci. Forum, 620-622, 731-734 (2009)
203. Y.F. Li, P. Liu, G. J. Qiao, J. F. Yang, H.Y. Jin, X.D. Wang, Fabrication and Properties of Pressureless Sintered Si3N4/BN Composite Ceramics with La2O3-Al2O3-Y2O3 as Sintering Additives, Mater. Sci. Forum, 620-622, 761-764 (2009)
204. 鲁元，杨建锋，陆伟忠，高积强，陕绍云，碳热还原-常压烧结法制备多孔氮化硅陶瓷, 硅酸盐学报, 37[8] 1277-1281 (2009)
205. 陕绍云，王亚明，贾庆明，杨建锋，高积强，金志浩多孔氮化硅陶瓷的研究进展, 硅酸盐通报, 28[1] 138-142 (2009)
206. 鲁元, 杨建锋, 陆伟忠, 高积强, 陕绍云, α-Si3N4晶种对层状多孔氮化硅陶瓷性能的影响, 中国科技论文在线, 4[4] 263-267 (2009)
207. H. R. Wang, J. F. Yang, J.Q. Gao, F. L. Yu and Y. Lu, “Processing, Microstructure and Mechanical Properties of Porous Silicon Nitride by Slip Casting Method Using Patrol Coke as Pore Former”, J. Ceram. Process Res., 10[6] 823-826 (2009)

2008年

208. 梁森，高积强，杨建锋，罗民，Cr0.8Fe1.2O3NTC热敏电阻制备及性能研究, 稀有金属材料与工程, 37[z1] 311-313 (2008)
209. 陈畅，杨建锋，高积强，余庭，金志浩，用热压法低温快速制备微-纳米Al2O3原位增强Fe-Cr-Ni, 稀有金属材料与工程, 37[z1] 66-69 (2008)
210. 江涛，金志浩，杨建锋，乔冠军,  B4C/BN纳米复合粉末的制备与显微结构的研究, 稀有金属材料与工程, 37[z1] 280-283 (2008)
211. Y. Lu, J. F. Yang and J.-Q. Gao, “Effects of a-Si₃N₄ Seeds and Sintering Additives on Properties of Porous Silicon Nitride Ceramics Fabricated by Carbothermal Reduction”, J. Ceram. Process Res., 9[6]657-660 (2008)
212. 于方丽，杨建锋，薛耀辉，高积强，金志浩, “烧结助剂对多孔氮化硅陶瓷的力学性能及介电性能的影响”(英文), 硅酸盐学报,  36[8] 1037-1041 (2008)
213. G.-P. Jiang, J. F. Yang, J.Q. Gao and K. Niihara, “Porous Silicon Nitride Ceramics Prepared by Extrusion Using Starch as Binder”, J. Am. Ceram. Soc., 91[11] 3510-3516 (2008)
214. T. Jiang, Z. H. Jin, J. F. Yang, and G. J Qiao, Wear resistance of silicon infiltrated B4C/BN composites, Mater. Lett., 62 [30] 4559-4562 (2008)
215. G. P. Jiang, J. F. Yang, Y.D. Xu, J. Q.. Gao, J. Z. Zhang, L. T. Zhang, L. F. Cheng, J. J. Lou, Effect of graphitization on microstructure and tribological properties of C/SiC composites prepared by reactive melt infiltration, Compos. Sci. Technol., 68 [12] 2468-2473 (2008)
216. T. Jiang, Z. H. Jin, J. F. Yang and G. J. Qiao. Mechanical property and R-curve behavior of the B4C/BN ceramics composites, Mater. Sci. Eng., A, 494[1-2] 203-216 (2008)
217. G. W. Liu, G. J. Qiao, H. J. Wang, J. F. Yang and T. J. Lu, Pressureless brazing of zirconia to stainless steel with Ag-Cu filler metal and TiH2 powder, J. Eur. Ceram. Soc., 28 [14] 2701-2708 (2008)
218. 罗民，程佳，马晶，陈小，王斌鉴，杨建锋, “仿生制备多孔氮化硅陶瓷”，无机材料学报，23 [4] 763-768(2008)
219. G.B. Yang, Y.J. Liu, G. J. Qiao, J. F. Yang and H. J. Wang Preparation and R-curve properties of laminated Si/SiC ceramics from paper, Mater. Sci. Eng., A, 492 [1-2] 327-332 (2008)
220. J. F. Zhu, J. Q. Gao, J. F. Yang, F. Wang and K. Niihara, Synthesis and microstructure of layered-ternary Ti2AlC ceramic by high energy milling and hot pressing, Mater. Sci. Eng., A, 490 [1-2] 62-65 (2008)
221. Y. Lu, J. F. Yang, S. Y. Shan, J. Q. Gao and Z.H. Jin, “Effects of Sintering Additives on Properties of Porous Silicon Nitride Ceramics Fabricated by Carbothermal Reduction”, Key Eng. Mater., 336-338, 878-880 (2008)
222. T. Jiang, Z. H. Jin, J. F. Yang, and G. J. Qiao, Property and microstructure of machinable B4C/BN nanocomposites, Key Eng. Mater., 368-372, 936-939 (2008)
223. J.K. Cheng, J.Q. Gao, J. F. Yang, J. L. Liu, X. Jiang and Y. G. Shi, Mass loss in SiC crystal growth process, Key Eng. Mater., 368-372, 1558-1560 (2008)
224. Y. Li, J. Q. Gao, J. F. Yang, H.J. Wang, G.J. Qiao, Fabrication of SiC dense-porous laminates by electrophoretic deposition process, Key Eng. Mater. 368-372, 1841-1843 (2008)
225. L. T. Guo, X. C. Liu, Z. Y. He, J. Q. Gao, J. F. Yang, T. W. Guo, Effect of fluoride corrosion on the bonding strength of Ti-porcelain, Mater. Lett., 62 [14] 2204-2206 (2008)
226. J. K. Cheng, J. Q. Gao, J. L. Liu, J. F. Yang, X. Jiang, R. Guo, Faster growth of 6H-SiC single crystals by a physical vapor transport technique with two crucibles, J. Elec. Mater., 37 [5] 721-725 (2008)

2007年

227. 黄群英，李春京，李艳芬，刘少军，宋勇，彭蕾，章毛连，朱志强，高胜，郭智慧，王永亮，吴宜灿，周新贵，万发荣，单以银，郁金南，朱升云，张品源，杨建锋，李合琴，巨新，室贺健夫，长坂琢也，大贯惣明，FDS团队，中国液态锂铅包层材料研究进展, 原子能科学技术, 14[z1] 397-406 (2007) 
228. C. Chen, T. Yu, J. F. Yang, J. Q. Gao, Z. H. Jin, K. Niihara, Nano-Al2O3 reinforced Fe-Cr-Ni composites fabricated by reactive hot pressing, Mater. Sci. Forum, 544-545, 87-90 (2007).
229. X.P. Ma, G.X. Li, J. F. Yang, Z. H. Jin, Types of phase separation and crystal nucleation-growth mechanisms for machinable glass ceramic, Mater. Sci. Forum, 544-545, 929-932 (2007)
230. M. Luo, J. Q. Gao, J. F. Yang, Biomorphic silicon nitride ceramics with fibrous morphology prepared by sol infiltration and reduction-nitridation, J. Am. Ceram. Soc., 90 [12] 4036-4039 (2007)
231. X. C. Liu, L. T. Guo, J. Q. Gao, T. W. Guo, X. J. Wang, H. Zhang, L. L. Zhang, J. F. Yang, Influence of artificial saliva with different pH value and fluoride concentration on the bond of titanium with porcelain,Rare Metal Mater Eng., 36 [Suppl. 2] 31-33 (2007)
232. S.Y. Shan, J. F. Yang, Y. Lu, J.Q. Gao, and K. Niihara, Effects of carbon source on microstructural evolution and sintering behavior of porous silicon nitride ceramics, Scripta Materialia, 56 [3], 193-196 (2007)
233. J. K. Cheng, J. Q. Gao, J. L. Liu, X. Jiang, J. F. Yang, G. J. Qiao, Helices in the 6H-SiC single crystal,Rare Metal Mater Eng., 36 [Suppl. 2] 184-186 (2007)
234. J. K. Cheng, J. Q. Gao, J. L. Liu, X. Jiang, J. F. Yang, G. J. Qiao, Effects of additive carbon source on growth of SiC single crystal, Rare Metal Mater Eng., 36 [9] 1661-1664 (2007)
235. J. L. Liu, J. Q. Gao, J. K. Cheng, J. F. Yang, G. J. Qiao, Methods for the reduction of the micropipe density in SiC single crystals, J. Mater. Sci., 42 (15): 6148-6152 (2007)
236. M. Luo, J. Q. Gao, X. Zhang, Hou GY, J. F. Yang, D. Ouyang, H. J. Wang, Z. H. Jin, Biomorphic TAX ceramics prepared by reduction-nitridation of charcoal/titania composite, J. Mater. Sci., 42 [11] 3761-3766 (2007)
237. M. Luo, J. Q. Gao, X. Zhang, J. F. Yang, G. Y. Hou, D. Ouyang, Z. H. Jin, Processing of porous TiN/C ceramics from biological templates, Mater. Lett., 61 [1] 186-188 (2007)

2006年

238. J. L. Liu, J. Q. Gao, J. K. Cheng, J. F. Yang, G. J. Qiao, Effects of Graphitization Degree of Crucible on SiC Single Crystal Growth Process, Diam. Relat. Mater., 15 [1] 117-120 (2006).
239. 陕绍云, 杨建锋, 高积强, 张文辉, 金志浩，用碳热还原法制备多孔氮化硅陶瓷, 无机材料学报，21[4]913-918(2006)
240. J. Yang, J. F. Yang, S.Y. Shan, J.Q. Gao, T. Ohji, Effect of sintering additives on microstructure and mechanical properties of porous silicon nitride ceramics, J. Am. Ceram. Soc., 89 [12] 3843-3845 (2006)
241. J. Yang, J. Q. Gao, J. F. Yang, G. J. Qiao, Y.H. Luo, Microstructure and properties of Si3N4 ceramics obtained from addition of beta-phase seeds and celsian, J. Univ. Sci. Tech. Beijing, 13 [5] 465-468 (2006)
242. L. T. Guo, H.J. Luo, J. Q. Gao, L.Z. Guo, J. F. Yang, Microwave hydrothermal synthesis of barium titanate powders, Mater. Lett., 60 [24] 3011-3014 (2006)
243. M. Luo, J. Q. Gao, X. Zhang J. F. Yang, G.Y. Hou, D. Ouyang, Z. H. Jin, Porous biomorph-genetic TiN/C ceramics by carbothermal reduction-nitridation using beech wood, Rare Metal Mater Eng., 35 [Suppl. 2] 133-136 (2006)
244. J. L. Liu, J. Q. Gao, J. K. Cheng, X. Jiang, J. F. Yang, G. J. Qiao, Effects of source materials and container on growth process of SiC crystal, Crystal Growth & Design 6 [9] 2166-2168 (2006)

2005年

245. J. F. Yang, G. J. Zhang, N. Kondo, and T. Ohji, Synthesis of Porous Si₃N₄ Ceramics with Rod-Shaped Pore Structure, J. Am. Ceram. Soc., 88 [4] 1030-1032 (2005)
246. J. L. Liu, J. Q. Gao, J. K. Cheng, J. F. Yang, G. J. Qiao, Effect of Graphitization Degree of Crucible on SiC Single Crystal Growth Process Rare Metal Mater. Eng., 34 [12] 1944-1947 (2005).
247. S. Y. Shan, J. F. Yang(Corresponding author) J. Q. Gao, W. H. Zhang, Z. H. Jin, R. Janssen, and T. Ohji, Porous Silicon Nitride Ceramics Prepared by Reduction-Nitridation of Silica, J. Am. Ceram. Soc., 88 [9] 2594-2596 (2005)
248. J. L. Liu, J. Q. Gao, J. K. Cheng, J. F. Yang, G. J. Qiao, Model for Micropipe Formation in 6H-SiC Single Crystal by Sublimation Method Mater. Lett., 59 [18] 2374-2377 (2005).
249. A. Diaz, S. Hampshire, J. F. Yang, et al., Comparison of mechanical properties of silicon nitrides with controlled porosities produced by different fabrication routes, J J. Am. Ceram. Soc., 88 [3] 698-706 (2005)
250. Y. P. Zeng, J. F. Yang, N. Kondo, et al. Fracture Energies of Tape-Cast Silicon Nitride with Beta-Si3N4 Seed Addition, J. Am. Ceram. Soc., 88 [6] 1622-1624 (2005).
251. J. F. Yang, S. Y. Shan, R. Janssen, G. Schneider, T. Ohji and S. Kanzaki, Synthesis of Fibrous b-Si3N4 Structured Porous Ceramics Using Carbothermal Nitridation of Silica Nitridation of Silica, Acta Materialia, 53 [10] 2981-2990 (2005)

2004年

252. J. F. Yang, G. J. Zhang, J. H. She, T. Ohji, and S. Kanzaki, Improvement of Mechanical Properties and Corrosion Resistance of Porous b-SiAlON Ceramics by Low Y₂O₃ Additions, J. Am. Ceram. Soc., 87[9] 1714-1719 (2004).
253. J. F. Yang, G. J. Zhang, I. Hayashi, N. Kondo, and T. Ohji, Porous Silicon Nitride and SiAlON Ceramics: Fabrication and Characterization, Silicates Industriels, 69 [7-8] 187-194 (2004).
254. G. J. Qiao, J. Q. Gao, Z. H. Jin, H. J. Wang, J. F. Yang, The heavy environmental loads in silicon carbide industries: Technological innovation and the results Rare Metal Mater. Eng., 33 [Suppl. 2] 29-31 (2004).
255. G. J. Zhang, M. Ando, J. F. Yang, T. Ohji, and S. Kanzaki, Reaction Synthesis of High Performance Boron Nitride-Containing Composites (BNCC), Silicates Industriels, 69 [5-6] 153-158 (2004).
256. G. J. Zhang, J. F. Yang, M. Ando, T. Ohji, and S. Kanzaki, Reactive Synthesis of Alumina-Boron Nitride Composites, Acta Mater., 52 [7] 1823-1835 (2004).
257. G. J. Zhang, M. Ando, J. F. Yang, T. Ohji and S. Kanzaki, Boron Carbide and Nitride as Reactants for in situ Synthesis of Boride-Containing Ceramic Composites, J. Eur. Ceram. Soc., 22 [2], 171-178 (2004).
258. G. J. Zhang, J. F. Yang, M. Ando, T. Ohji and S. Kanzaki, Mullite-Boron Nitride Composite with High Strength and Low Elasticity, J. Am. Ceram. Soc., 87 [2] 296-298 (2004).
259. Z. Y. Deng, J. H. She, Y. Inagaki, J. F. Yang, T. Ohji and Y. Tanaka, Reinforcement by Crack-Tip Blunting in Porous Ceramics, J. Eur. Ceram. Soc., 24 [7] 2055-2059 (2004).
260. G. J. Zhang, J. F. Yang, M. Ando, and T. Ohji, Reactive Hot Pressing of Alumina-Silicon Carbide Nanocomposites, J. Am. Ceram. Soc., 87 [2] 299-301 (2004). 
261. G. J. Zhang, M. Ando, J. F. Yang, T. Ohji and S. Kanzaki, Boron Carbide and Nitride as Reactants for in situ Synthesis of Boride-Containing Ceramic Composites, J. Eur. Ceram. Soc., 22 [2], 171-178 (2004). 

2003年

262. J. F. Yang, Y. P. Zeng, T. Ohji, S. Kanzaki, and G. J. Zhang, Fabrication and Mechanical Properties of Porous Silicon Nitride Ceramics from Low-Purity Powder, J. Ceram. Soc. Jpn., 111 [10] 758-761 (2003).
263. J. F. Yang, G. J. Zhang, N. Kondo, J. H. She, Z. H. Jin, T. Ohji and S. Kanzaki, Porous 2H-Silicon Carbide Ceramics Fabricated by Carbothermal Reaction between Silicon Nitride and Carbon, J. Am. Ceram. Soc., 86 [6] 910-14 (2003).
264. J. F. Yang, J.H. She, G.J. Zhang, N. Kondo, T. Ohji, Highly porous silicon-based ceramics fabricated with restrained sintering by reaction bonding (RSRB), Key Eng. Mater., 247: 227-230 2003
265. J.H. She, J. F. Yang, T. Ohji, Reaction bonding of porous mullite ceramics, Key Eng. Mater., 247: 223-226 2003
266. J. H. She, J. F. Yang, D. D. Jayaseelan, S. Ueno, N. Kondo, T. Ohji, and S. Kanzaki, Strength of Silicon Nitride after Thermal Shock, J. Am. Ceram. Soc., 86 [9] 1619–21 (2003)
267. J. H. She, J. F. Yang, D. D. Jayassenlan, N. Kondo, T. Ohji, S. Kanzaki and Y. Inagaki, Thermal Shock Behavior of Isotropic and Anisotropic Porous Silicon Nitride, J. Am. Ceram. Soc., 86 [4] 738-40 (2003)
268. J. H. She, J. F. Yang, and T. Ohji, Thermal shock resistance of porous silicon nitride ceramics, J. Mater. Sci. Lett., 22 [5] 331-333 (2003)
269. N. Kondo, Y. Inagaki, J. F. Yang and T. Ohji, High Temperature Mechanical Properties of Partially Sinter-Forged Porous Anisotropic Silicon Nitride, J. Ceram. Soc. Jpn., 111 [4] 285-87(2003).
270. J. H. She, J. F. Yang, Y. Beppu, and T. Ohji, Hertzian Contact Damage in a Highly Porous Silicon Nitride Ceramic, J. Eur. Ceram. Soc., 23[8] 1193-1197 (2003).
271. Z.Y. Deng, Y. Zhou, M.E. Brito, J. F. Yang, T. Ohji, Fracture-mode change in alumina-silicon carbide composites doped with rare-earth impurities, J. Am. Ceram. Soc., 86 [10] 1789-1792 (2003).
272. G. J. Zhang, J. F. Yang, M. Ando, T. Ohji and S. Kanzaki, In-Situ Reaction Synthesis of Oxide-Boron Nitride Composites, Advanced Engineering Materials, 5 [10] 741-744 (2003).
273. J. F. Yang, Z. Y. Deng, and T. Ohji, Fabrication and Characterisation of Porous Silicon Nitride Ceramics using Yb₂O₃ as Sintering Additive, J. Eur. Ceram. Soc., 23 [2] 371-378 (2003).
274. G.J. Zhang, M. Ando, J. F. Yang, T. Ohji, Reaction synthesis of ceramic composites containing in situ formed boron nitride as dispersed phase, Key Eng. Mater., 247: 117-120 (2003).
275. G.J. Zhang, J. F. Yang, M. Ando, and T. Ohji, SiAlON-boron nitride porous composites: In situ synthesis, microstructure and properties, Key Eng. Mater., 237, 123-127. (2003). 

2002年

276. J. H. She, J. F. Yang, N. Kondo, T. Ohji, S. Kanzaki, and Z. Y. Deng, High-Strength Porous Silicon Carbide Ceramics by an Oxidation-Bonding Technique, J. Am. Ceram. Soc., 85 [11] 2852–54 (2002).
277. G. J. Zhang, J. F. Yang, M. Ando and T. Ohji, Reaction Synthesis of Aluminum Nitride-Boron Nitride Composites Based on the Nitridation of Aluminum Boride, J. Am. Ceram. Soc., 85 [12] 2938–44 (2002).
278. J. F. Yang, Y. Beppu and T. Ohji, Corrosion Behavior of Porous SiAlON Ceramics, Key Eng. Mater., 237, 233-237 (2002)
279. J. F. Yang, G. J. Zhang, N. Kondo and T. Ohji, Synthesis and Properties of Porous Si₃N₄/SiC Nanocomposites by Carbothermal Reaction between Si₃N₄ and Carbon, Acta Mater., 50 [19] 4831-4840 (2002).
280. Z. Y. Deng, J. F. Yang, Y. Beppu, M. Ando, and T. Ohji, Effect of Agglomeration on Mechanical Properties of Porous Zirconia Fabricated by Partial Sintering, J. Am. Ceram. Soc., 85 [8] 1961–65 (2002).
281. J. F. Yang, Y. Beppu, G. J. Zhang, and T. Ohji, Synthesis and Properties of Porous Single-Phase ’-SiAlON Ceramics, J. Am. Ceram. Soc., 85 [7] 1879–81 (2002).
282. J. F. Yang, T. Ohji, S. Kanzaki, A. Díaz and S. Hampshire, Microstructure and Mechanical Properties of Si₃N₄ Ceramics with Controlled Porosity, J. Am. Ceram. Soc., 85 [6] 1512-16 (2002).
283. G. J. Zhang, Y. Beppu, M. Ando, J. F. Yang and T. Ohji, In Situ Reaction Synthesis of Silicon Carbide-Boron Nitride Composite from Si₃N₄-B₂O₃-C, J. Am. Ceram. Soc., 85 [11] 2858–60 (2002).
284. G. J. Zhang, J. F. Yang and T. Ohji, Thermogravimetry, Differential Thermal Analysis and Mass Spectrometry Study of the Si₃N₄-B₄C-C Reaction System for the Synthesis of Silicon Carbide-Boron Nitride Composites, J. Am. Ceram. Soc., 85 [9] 2256-60 (2002) 
285. G. J. Zhang, J. F. Yang, M. Ando and T. Ohji, Nonoxide-Boron Nitride Composites: In Situ Synthesis, Microstructure and Properties, J. Eur. Ceram. Soc., 22, 2551-54 (2002). 
286. G. J. Zhang, J. F. Yang and T. Ohji, In Situ Si₃N₄-SiC-BN Composites: Preparation, Microstructures and Properties, Materials Science Engineering A, 328 [1-2] 201-205 (2002). 
287. N. Claussen, P. Beyer, R. Janssen, M. May, T. Selchert, J. F. Yang, T. Ohji, S. Kanzaki, A. Yamakawa, Squeeze Cast -Si₃N₄-Al Composites, Advanced Engineering Materials, 4 [3], 117-119 (2002).

2001年

288. J. F. Yang, T. Ohji and K. Niihara, Role of Sintering Aids in Phase Transformation, Microstructure and Mechanical Properties of Si₃N₄/SiC Nanocomposites, J. Ceram. Soc. Jpn., 109[11], 920-923 (2001).
289. J. F. Yang, T. Ohji, T. Sekino, C.L. Li, and K. Niihara, Phase Transformation, Microstructure and Mechanical Properties of Si₃N₄/SiC Composite, J. Eur. Ceram. Soc., 21 [12], 2179-2183 (2001).
290. J. F. Yang, G. J. Zhang, and T. Ohji, Fabrication of Low-Shrinkage, Porous Silicon Nitride Ceramics by Addition of a Small Amount of Carbon, J. Am. Ceram. Soc., 84 [7] 1639–41 (2001).
291. J. F. Yang, G. J. Zhang and T. Ohji, Porosity and Microstructure Control of Porous Ceramics by Partial Hot-Pressing, J. Mater. Res., 16 [7] 1916-1918 (2001).
292. G. J. Zhang, J. F. Yang, Z. Y. Deng, and T. Ohji, Fabrication of Porous Ceramics with Unidirectionally Aligned Continuous Pores, J. Am. Ceram. Soc., 84 [6] 1395–97 (2001).
293. N. Kondo, Yoshikazu Suzuki, J. F. Yang, G. J. Zhang, and T.. Ohji, Porous Silicon Nitride-Based Ceramics Fabricated from Silicon and Carbon Powders, J. Mater. Sci. Lett., 20 [5] 461-463 (2001).
294. J. F. Yang, T. Sekino, Y. H. Choa, K. Niihara, and T. Ohji, Microstructures and Mechanical Properties of Sinter-Post-HIPed Si₃N₄/SiC Composites, J. Am. Ceram. Soc., 84 [2] 406-412 (2001).
295. G. J. Zhang, J. F. Yang, Z. Y. Deng, and T. Ohji, Effect of Y₂O₃-Al₂O₃ Additive on the Phase Formation and Densification Process of in situ SiC-BN Composite, J. Ceram. Soc. Jpn., 109 [1] 45-48 (2001).

2000年

296. G. J. Zhang, Z. Y. Deng, N. Kondo J. F. Yang, and T. Ohji, Reactive Hot Pressing of ZrB₂-SiC Composites, J. Am. Ceram. Soc., 83 [9] 2330-2332 (2000). 
297. J. F. Yang, G. J. Zhang, T. Ohji and K. Niihara, Effects of MgAl₂O₄-ZrO₂ Addition on Sintering Behaviors and Mechanical Properties of Silicon Nitride Ceramics, J. Ceram. Soc. Jpn., 108 [8] 697-700 (2000)
298. J. F. Yang, T. Ohji and K. Niihara, Influence of Yttria – Alumina Content on Sintering Behavior and Microstructure of Silicon Nitride Ceramics, J. Am. Ceram. Soc., 83 [8] 2094-96 (2000).

1999年

299. J. F. Yang, Y. H. Choa, and K. Niihara, Densification and Mechanical Properties of Si₃N₄/SiC Nanocomposite Using Si Nitrided Si₃N₄ Powder, J. Mater. Sci. Lett., 18 [7] 505-507 (1999). 
300. J. F. Yang and K. Niihara, Processing and Mechanical Properties of Si₃N₄/SiC Nanocomposites Using Si Nitrided Si₃N₄ Powder, Materials Science Research International, 5 [2], 84-89(1999).
301. J. F. Yang, T. Sekino and K. Niihara, Effect of Grain Growth and Measurement on Fracture Toughness of Silicon Niride Ceramics, J. Mater. Sci., 34 [22] 5543-5548 (1999). 
302. J. F. Yang, T. Sekino and K. Niihara, The Effect of Microstructure on Fracture Toughness for Silicon Nitride Ceramics, Key Eng. Mater., 161-163, 195-198 (1999). 

1998年

303. J. F. Yang, Y. H. Choa, T. Sekino and K. Niihara, Fabrication and Mechanical Properties of Si₃N₄/SiC Nanocomposite under Pressureless Sintering, Journal of the Japan Society of Powder and Powder Metallurgy, 45 [12] 1172-1177 (1998).
304. J. F. Yang, Y. H. Choa, J. P. Singh and K. Niihara, Fabrication and Mechanical Properties of Si₃N₄/SiC Nanocomposite with Pressureless Sintering and Sinter-Post-HIPing, J. Ceram. Soc. Jpn., 106 [10] 951-957(1998).  

1997年

305. J. F. Yang, T. Hirano, T. Sekino and K. Niihara, The Effects of Oxide Additions on the Microstructure and R-Curve Behavior of In-situ Reinforced Silicon Nitride, Script Materialia.37 [8] 1135-1141 (1997).

1996年

306. T. Hirano, J. F. Yang and K. Niihara, Effect of Seed Crystal Properties on the Microstructure of Si₃N₄Ceramics, J. Ceram. Soc. Jpn., 104 [5] 462-465 (1996).
307. T. Hirano, J. F. Yang, Y. H. Choa, and K. Niihara, Simultaneous Improvement of Fracture Strength and Creep Resistance of Si₃N₄ Based Ceramics, J. High Temperature, 22 [5] 185-192 (1996) 
308. T. Hirano, J. F. Yang and K. Niihara, Effects of ball-milling time on the properties of law purity beta-phase silicon nitride powder and the hot-pressed body, JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 104 [4] 348-353 (1996).