EN 登录

谭厚章

教授 博士生导师 硕士生导师

个人信息
Personal Information
  • 学历: 博士研究生毕业
  • 学位: 博士
  • 职称: 教授
  • 毕业院校: 西安交通大学
  • 学科: 动力工程及工程热物理

论文成果

当前位置: 中文主页 > 科学研究 > 论文成果

A New Agro/Forestry Residues Co-Firing Model in a Large Pulverized Coal Furnace: Technical and Economic Assessments

发布时间:2025-04-30
点击次数:
发布时间:
2025-04-30
论文名称:
A New Agro/Forestry Residues Co-Firing Model in a Large Pulverized Coal Furnace: Technical and Economic Assessments
发表刊物:
Energies
摘要:
Abstract: Based on the existing biomass co-firing technologies and the known innate drawbacks of dedicated biomass firing, including slagging, corrosion and the dependence on fuel, a new model of agro/forestry residue pellets/shreds and coal co-fired in a large Pulverized Coal (PC) furnace was proposed, and the corresponding technical and economic assessments were performed by co-firing testing in a 300 MW PC furnace and discounted cash flow technique. The developed model is more dependent on injection co-firing and combined with co-milling co-firing. Co-firing not only reduces CO2 emission, but also does not significantly affect the fly ash use in cement industry, construction industry and agriculture. Moreover, economic assessments show that in comparison with dedicated firing in grate furnace, agro/forestry residues and coal co-firing in a large PC furnace is highly economic. Otherwise, when the co-firing ratio was below 5 wt%, the boiler co-firing efficiency was 0.05%–0.31% higher than that of dedicated PC combustion, and boiler efficiencies were about 0.2% higher with agro/forestry residues co-firing in the bottom and top burner systems than that in a middle burner system.
合写作者:
Weigang Xu, Yanqing Niu, Houzhang Tan, et al
卷号:
6
页面范围:
4377-4393
是否译文:
发表时间:
2013-08-23