[1] DKG-Jahrestagung, 2009,23,March, Archen, Germany
Xiaoyong Tian , Jens Günster, Jörg Melcher, Jürgen G. Heinrich, Process parameters analysis of direct laser sintering and post treatment of porcelain components using Taguchi’s method; (Poster)
[2] 11th International Conference and Exhibition of ECerS, June 26, 2009, Cracow, Poland
Xiaoyong Tian, Jens Günster, Jörg Melcher, Jürgen G. Heinrich, Rapid manufacturing of ceramic components by laser direct sintering process parameters analysis; (Oral presentation)
[3] 20th SFF symposium, August 3, 2009, Austin, USA
Xiaoyong Tian, Jens Günster, and Jürgen G. Heinrich, Experimental and simulation analysis of the stress relief hypothesis for laser direct sintering porcelain ceramics; (Oral presentation)
[4] 1st Laser material processing, April 22, 2010, Clausthal, Germany
Xiaoyong Tian, Jürgen G. Heinrich, Laser direct sintering of ceramics using Layer-wise Slurry Deposition —Process parameters analysis experimentally and by simulation; (Oral presentation)
[5] 12th International Ceramics Congress, June 9, 2010, Montecatini, Italy
X. Tian, A. Dittmar, E. Kivitz, J. G. Heinrich, and W. Braze, Rapid prototyping of ceramics by LSD and LSS. (Oral presentation)
[6] 12th Conference of the European Ceramic Society, June 19-23, 2011, Stockholm, Sweden
Xiaoyong Tian, Jens, Guenster, Feasibility Study on Rapid Prototyping of Porcelain Products; (Invited presentation)
[7] PIERS 2012 (Progress In Electromagnetics Research Symposium), Kuala Lumpur, Malaysia
Xiaoyong Tian, Ming Yin, Haoxue Han, and Dichen Li, “A New Tunable Metamaterial Using Low-loss Ferrouid and Its Application on Lens Antenna” and “Fabrication of Gradient Index 3D Photonic Crystals Structure in Metamaterial Regime”; (Oral presentation)
[8] 23th International SFF Symposium – An Additive Manufacturing Conference，August 4，2012 Austin, Texas, USA，美国
Xiaoyong Tian, Dichen Li, Bingheng Lu, R&D and education activities for RP&M technologies in Xi’an Jiaotong University, China (Invited Oral presentation)
[9] PIERS 2013 in Stockholm Progress In Electromagnetics Research Symposium, Stockholm, Sweden, August 12-15, 2013
“A 3D Electromagnetic Wave Concentrator Realized with Gradient Index Woodpile Structure in Metamaterial Regime” and “Broadband Flattened Luneburg Lens with Ultra-wide Angle Based on a Liquid Medium”
[10] 2014年4月20-23日，The 3rd International Symposium on Materials Processing Science with Lasers as Energy Sources，德国，柏林
特邀报告，Xiaoyong Tian, Dichen Li, Ling Wang, Review : Research activities on laser-based additive manufacturing processes in Xi’an Jiaotong University
[11] 2015年1月20日，Sino-German Symposium and Academic Visit “Laser additive Manufacturing and processing of High-performance Materials”, Aachen, Germany
Xiaoyong Tian, R&D activities on laser-based AM processes in Xi’an Jiaotong University, China
[12] 第三届亚洲 3D 打印（增材制造）应用技术论坛，深圳，2015年5月，学术报告
高性能连续纤维增强复合材料3D打印及其太空应用探索
[13] 第一届全国增材制造青年科学家论坛，武汉，2015年4月，学术报告，
增材制造工艺创新与应用探索
[14] 2016 6 22, The i-SAIRAS 2016，北京
Xiaoyong Tian，Zhanghao Hou, Dichen Li, Bingheng Lu, 3D Printing of Continuous Fiber Reinforced Composites with A Robotic System for Potential Space Applications
[15] 2016.8.01 PRICM 9，日本京都 邀请报告
Tian Xiaoyong, Yang Chuncheng, Li Dichen, 3D printing for high performance continuous fiber reinforced composites and application
[16] 2016-08-08 Piers 上海 邀请报告
Xiaoyong Tian, Lixian Yin, 3D printing: a useful tool for the fabrication of artificial electromagnetic (EM) medium
[17] 2016-08-10 SFF， Austin，美国，学术报告
Tengfei Liu, Xiaoyong Tian, Yugang Duan, and Dichen Li，Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Mengxue Yan, Xiaoyong Tian, Yi Cao, and Dichen Li，Rapid Fabrication of Complex Porous Polyamide Mold by Selective Laser Sintering for Pressure Slip Casting
[18] 2016-10-14, 第十九届全国复合材料学术会议，西安，海报
田小永，刘腾飞，李涤尘，连续纤维增强热塑性复合材料3D打印及回收再制造
[19] 2016-10-21，IUMRS-ICA，亚洲材料大会，青岛，邀请报告
Xiaoyong Tian, Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites.
[20] 2016-12-25，第一届新型功能结构技术学术会议，沈阳，邀请报告
田小永，超材料结构飞行器隐形设计及3D打印制造工艺探索