3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
发布时间：2025-04-30
点击次数：
- 发布时间：
- 2025-04-30
- 论文名称：
- 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
- 发表刊物：
- RP Journal
- 摘要：
- A novel 3D printing process for continuous fiber reinforced thermoplastic composites (CFRTPCs) based on fused deposition modeling (FDM) was put forward to realize the low cost rapid fabrication of complicated composite components. The mechanism of the proposed process was described as an integrated transient printing system, which consists of the thermoplastic polymer melting, the continuous fiber hot-dipping and the impregnated composites extruding. A FDM-based equipment for CFRTPCs with a novel composite extrusion head was developed to fabricate composite samples successfully. Flexural strength and the tensile strength of these 10 wt% CF/ABS specimens were improved to 127 MPa and 147 MPa. Moreover, these test results also exposed the very low interlaminar shear strength (only 2.81 MPa) and the inferior interface performance due to the weak bonding between layers as well as fibers and the matrix. Some samples were fabricated to demonstrate the huge potential for the 3D printed CFRTPCs.
- 合写作者：
- Chuncheng Yang, Xiaoyong Tian*, Tengfei Liu, Yi Cao, and Dichen Li
- 是否译文：
- 否
- 发表时间：
- 2016-02-04