Controllable inter-line bonding performance and fracture patterns of continuous fiber reinforced composites by sinusoidal-path 3D printing
发布时间：2025-04-30
点击次数：
- 发布时间：
- 2025-04-30
- 论文名称：
- Controllable inter-line bonding performance and fracture patterns of continuous fiber reinforced composites by sinusoidal-path 3D printing
- 发表刊物：
- Composites Science and Technology
- 摘要：
- In order to improve the inter-line bonding performance of 3D printed continuous fiber reinforced composites, an innovative sinusoidal-path extrusion 3D printing method was proposed. Conventional 3D printing constructs components from stacks of individual extruded straight lines and flat layers, resulting in the relatively weak bonding that occurs between individual lines and layers and is aggravated due to the introduction of continuous fibers. The influence of structural parameters (amplitude & frequency) on the inter-line tensile properties and fracture patterns of sinusoidally 3D printed composites were systematically investigated. The results showed that as the amplitude and frequency of the sinusoidal path increased, the inter-line tensile strength, tensile modulus and fracture energy absorption of CCF/PLA composites increased 95.4%, 57.3% and 165%, respectively. Based on this study, a non-planar sinusoidal layer extrusion 3D printing method of CFRTPCs was proposed, which provides a new idea for comprehensive control of the anisotropy of 3D printed composites.
- 合写作者：
- Shang Junfan, Tian Xiaoyong* et al
- 卷号：
- 192
- 页面范围：
- 108096
- 是否译文：
- 否
- 发表时间：
- 2020-02-28