Publications

Research Articles in Journals
[1] J. Li  and N. Satofuka, Optimization design of a compressor cascade airfoil using a Navier-Stokes solver and genetic algorithms, Proc. I MechE., part A: J. Power and Energy, 2002, 216: 195-202
[2] Xiongwen Zhang, Jun Li, Hui Xu, Guojun Li, Numerical study of self-adaptive vibration suppression for flexible structure using interior inlay viscous fluid unit method, Journal of Sound and Vibration, 2006, 297: 627-634
[3] Liu LJ, Li J, Feng ZP (2005), A numerical method for simulation of attached cavitation flows, International Journal for Numerical Methods in Fluids, 2006, 52: 639-658
[4] Xiongwen Zhang, Jun Li, Guojun Li, Zhengping Feng, Development of a control-oriented model for the solid oxide fuel cell, Journal of Power Sources, 2006, 160(1): 258-267
[5] Xiongwen Zhang, Jun Li, Guojun Li, Zhenping Feng, Dynamic modeling of a hybrid system of the solid oxide fuel cell and recuperative gas turbine, Journal of Power Source, 2006, 163(1): 523-531
[6] Jun Li, Lijun Liu, Zhenping Feng, Numerical Prediction of the Hydrodynamic Performance of a Centrifugal Pump in Cavitating Flows, Communications in Numerical Methods in Engineering, 2007, 23(5): 363-384
[7] LI Jun, LIU Lijun, FENG Zhenping, Numerical validation of computational model for sheet cavitating flows. Chinese Journal of Mechanical Engineering, 2006, 19(1):45-49
[8] Li J, Liu LJ, Feng ZP, Two-dimensional analysis of cavitating flows in a centrifugal pump using a single-phase RANS solver and cavitation model, Proc. IMechE Part A: Journal of Power and Energy, 2006, 220(7): 783-791
[9] Xiongwen Zhang, Guojun Li, Jun Li, Zhenping Feng, Numerical study on electrical characteristics of solid oxide fuel cells, Energy Conversion and Management, 2007, 48(3): 977-989
[10] Xiongwen Zhang, Jun Li, Guojun Li, Zhenping Feng, Cycle analysis of an integrated solid oxide fuel cell and recuperative gas turbine with an air reheating system, Journal of Power Source, 2007, 164(2): 752-760
[11] Xiongwen Zhang, Jun Li, Guojun Li, Zhenping Feng, Numerical study on the thermal characteristics in a tubular solid oxide fuel cell with indirect internal reformer, International Journal of Thermal Science, 2009, 48(4): 805-814.
[12] Xin Yan, Jun Li, Liming Song, Zhenping Feng, Investigations on the Discharge and Total Temperature Increase Characteristics of the Labyrinth Seals with Honeycomb and Smooth Lands [J], ASME Journal of Turbomachinery, 2009, 131(4): 041009-1-041009-8.
[13] X.W. Zhang, S.H. Chan, H.K. Ho, Jun Li, Guojun Li, Zhenping Feng, Nonlinear model predictive control based on the moving horizon state estimation for the solid oxide fuel cell, International Journal of Hydrogen Energy,2008, 33(9): 2355-2366.
[14] Jun LI, Shengry KONG, Xin YAN, et al., Numerical Investigations on the Leakage Performance of the Labyrinth Honeycomb Seal, ASME Journal of Engineering for Gas Turbine and Power, 2010, 132(6): 062501.
[15] Jun LI, Obi. S., Zhenping FENG, The effects of clearance sizes on labyrinth brush seal leakage performance using a reynolds0averaged navier-stokes solver and non-Darcian porous medium model, Proc. IMechE Part A: Journal of Power and Energy, 2009, 223(8): 953-964.

[16] Jun LI, Hao SUN, Jinshan WANG et al., Numerical Investigations on the Steady and Unsteady Leakage Flow and Heat Transfer Characteristics of Rotor Blade Squealer Tip, Journal of Thermal Science, 2011, 20(4): 304-311.

[17] Xin YAN, Jun LI, Zhenping FENG, Effects of Sealing Clearance and stepped geometries on discharge and heat transfer characteristics of stepped labyrinth seals, Proc. IMechE Part A: Journal of Power and Energy, 2011, 225: 521-538.

[18] Song, L, Chang L, LI J., et al., Aerodynamic optimization of axial turbmoachinery blade using parallel adaptative range differential evolution and Reynolds-averaged navier-Stokes Solutions, International Journal for Numerical Methods in Biomedical Engineering, 2011, 27: 283-303.

[19] Yan, X., Li, J, Feng Z., Investigations on the rotordynamic characteristics of a hole-pattern seal using transient CFD and periodic circular orbit model, ASME Journal of Vibration and Acoustics, 2011, 133(40: 041007.

[20] Zhigang LI, Jun LI, Xin YAN, et al., Effects of Pressure Ratio and Rotating Speed on Leakage Flow and Cavity Pressure in the Staggered Labyrinth Seal, ASME Journal of Engineering for Gas Turbines and Power, 2011, 133(11): 114503.

[21] Song, L., Chang, L., Li, J., et al., Automated Multi-objective and multidisciplinary dsign optimization of a transonic turbine stage, Proc. IMechE Part A: Journal of Power and Energy, 2011, 236: 262-276.

[22] Chang, L., Song, L., Li, J., et al., A Study on Multidisciplinary Optimization of an Axial Compressor Blade based on Evolutionary Algorithms, ASME Journal of Turbomachiery, 2012, 134: 054501.

[23] Sun , H., Li, J. Feng, Z., Investigations on aerodynamic performance of turbine cascade at different flow conditions, Engineering Applications of Computational Fluid mechanics, 2012, 6(2): 214-223.

[24] Kun He, Jun Li, Xin Yan, et al., Investigations of the conjugate heat transfer and windage effects in stepped labyrinth seals, International Journal of Heat and Mass Transfer, 2012, 55: 4526-2657.

[25] Zhigang Li, Jun Li, Xin Yan, et al., Numerical Investigations on the leakage flow characteristics of pocket damper labyrinth seals, Proc. IMechE Part A: Journal of Power and Energy, 2012, 226(7): 932-948.

[26] Jun Li, Zhigang Li, Zhenping Feng, Investigations on the rotordynamic coefficients of pocket damper seals using the multifrequency one-diemnsional whirl orbit model and RANS solutions, ASME Journal of Engineerging for Gas Turbines and Power, 2012, 134(10): 102510.

[27] Jun Li, Bo Qiu, Zhenping Feng, Experimental and Numerical Investigations on the leakage flow characteristics of the labyrinth brush seal, ASME Journal of Engineering for Gas Turbines and Power, 2012, 134(10): 102509.

Full-length Conferences Publications
[1] Li Jun, Tsukamoto Hiroshi，Optimization of Low Solidity Diffuser for Diffuser Pump by Genetic Algorithm, 22nd IAHR Symposium on Hydraulic Machinery and Systems, June29-July 2, 2004, Stockholm Sweden
[2] Jun Li, Guojun Li, Zhenping Feng, Lijun Liu, Multiobjective Optimization Approach to Turbomachinery Blades Design, Proceedings of the ASME Turbo Expo 2005, 2005, p1051-1058
[3] Liming SONG, Zhenping FENG, Jun LI. Shape Optimization of Turbine Stage Using Adaptive Range Differential Evolution and Three-Dimensional Navier-stokes Solver, Proceedings of the ASME Turbo Expo 2005, 2005, p 1033-1040
[4] Zhengping FENG, Qinghua DENG, Jun LI, Aerothermodynamic Design and Numerical Simulation of the Radial Inflow Turbine Impeller for a 100kW Microturbine, Proceedings of the ASME Turbo Expo 2005, p 873-880
[5] Jun Li, Qinghua Deng, Zhenping Feng, Numerical Investigations of the Flow Characteristics in the Straight-through Honeycomb Seal, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Sumposia, FEDSM2005, 2005, p1565-1571
[6] Jun Li, Zhenping Feng, Computational Investigations on the Flow Characteristics in High Rotating Stepped Labyrinth Seals, ACGT2005-017, The First Asian Congress on Gas Turbine, Nov. 15-18, 2005, Seoul National University, Seoul, Korea
[7] Jun LI, Xin YAN, Zhenping FENG, Numerical Investigations on the Flow Characteristics in the Labyrinth Seal with the Smooth and Honeycomb Lands, Asian Joint Conference on Propulsion and Power 2006 (AJCPP2006) April 20-23, 2006, Beijing
[8] Li Jun, Yan Xin, Feng Zhenping, Effects of Pressure Ratio and Fin Pitch on Leakage Flow Characteristics in High Rotating Labyrinth Seals, GT2006-91145, Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air, 1591-1598
[9] Li Jun, Yan Xin, Li Guojun, Feng Zhenping, Effects of Pressure Ratio and Sealing Clearance on Leakage Flow Characteristics in the Rotating Honeycomb Labyrinth Seal, Proceedings of ASME Turbo Expo 2007, Power for Land, Sea, and Air, May 14-17, 2007, Montreal, CANADA, GT2007-27740
[10] Jun LI, Qi SUN, Jian-lu WANG, Zhen-ping FENG, Experimental and Numerical Investigations on the Aerodynamic Performance of the Fore-Loaded and Aft-Loaded Turbine Blades, AIAA 2007-1217, ISABEXVIII, Sept. 2-7, 2007, Beijing, China
[11] Xin YAN, Jun LI, Zhenping FENG, Gangyun ZHONG, Qilin WU, Jianlu WANG, Computational Fluid Dynamics Analysis Approach to the Aerodynamic Performance of a Nozzle Controlling Stage for a 600MW Steam Turbine, ICOPE-07-c-148, International Conference on Power Engineering-2007 (ICOPE-2007)， Hangzhou, China, October 23-27, 2007
[12] Jun LI, Qiang LV, Xin YAN, Yonghui XIE, Zhenping FENG, The Effect of the Rotor Shroud Leakage Flow on the Aerodynamic Performance of a One and Half Turbine Stage, ICOPE-07-c-149， International Conference on Power Engineering-2007 (ICOPE-2007)， Hangzhou, China, October 23-27, 2007
[13] Hao SUN, Jun LI, Zhenping FENG, Effects of Tip Clearance on Unsteady Flow Characteristics in an Axial Turbine Stage, Proceedings of ASME Turbo Expo 2009: Power for Land, Sea and Air, June 8-12, 2009, Orlando, Florida, USA, GT2009-59828.
[14] Chang LUO, Liming SONG, Jun LI, Zhenping FENG, Multiobjective Optimization Approach to Multidisciplinary Design of a Three-dimensional Transonic Compressor Blade, Proceedings of ASME Turbo Expo 2009: Power for Land, Sea and Air, June 8-12, 2009, Orlando, Florida, USA, GT2009-59982.
[15]Jun LI, Yan ZHANG, Zhenping FENG，ANALYSIS OF THE UNSTEADY AERODYNAMIC PERFORMANCE WITH THE SHROUDED LEAKAGE FLOW OF A ONE AND HALF AXIAL TURBINE STAGE，ISABE-2009-1257, Sept. 7-11, Montreal , Canada .
[16] Jun LI, Yangzi HUANG, et al., Effects of Clearances on the Leakage Flow Characteristics of Two Kinds of Brush Seal and Referenced Labyrinth Seal, ASME Turbo Expo 2010, GT2010-22877, Glasgow, UK.
[17] Yan SHI, Jun LI, Zhenping FENG, Influence of Rotor Blade Fillets on Aerodynamic Performance of Turbine Stage, ASME Turbo Expo 2010, GT2010-23721, Galsgow, UK.
[18] Chang LUO, Liming SONG, Jun LI, et al., Numerical Study of Internal Flow Fields in Steam Turbines with Balance Hole, ASME Turbo Expo 2010, GT2010-23704, Galsgow, UK.