• English
  • 登录

刘弘光

教授 博士生导师 硕士生导师

个人信息 更多+
  • 电子邮箱：
  • 学历： 硕博连读
  • 学位： 博士
  • 职称： 教授

论文著作

当前位置： 中文主页 - 研究内容 - 论文著作

  1. Liu X, Liu H*, Shi S, Tang Y, Zhang J*. On revealing the mechanisms involved in brittle-to-ductile transition of fracture behaviors for γ-TiAl alloy under dynamic conditions. Journal of Alloys and Compounds, 2025, 1010: 177614, https://doi.org/10.1016/j.jallcom.2024.177614

  2. Feng W, Zhang J*, Liu H, Zhao W. Effect of shot peening with different peening intensity and coverage on surface integrity of Inconel 718 alloy. Procedia CIRP， 2024，123: 119-124. DOI: https://doi.org/10.1016/j.procir.2024.05.023
  3. 刘鑫, 张俊, 徐斌斌, 刘弘光, 赵万华。激光辅助铣削过程的预热温度场调控方法研究[J]. 机械工程学报, 2024, 60(9): 218-228. https://10.3901/JME.2024.09.218
  4. Li B, Liu H, Zhang J*, Xu B, Zhao W. Multi-mechanism-based twinning evolution in machined surface induced by thermal-mechanical loads with increasing cutting speeds. International Journal of Machine Tools & Manufacture, 2023, 192: 104074, https://doi.org/10.1016/j.ijmachtools.2023.104074
  5. Liu H*, Cherif M, Calamaz M, Birembaux H, Rossi F, Poulachon G, Ayed Y. Progressive damage induced degradation of mechanical properties in the hole surfaces during drilling processes of CFRP. CIRP Annals - Manufacturing Technology, 2023, 72(1): 65-68, https://doi.org/10.1016/j.cirp.2023.04.044
  6. Xu B, Liu X, Liu H, Zhang J*, Zhao W. A comparative study on modeling approaches towards laser-assisted machining [J]. Procedia CIRP, 2023, 117: 26-31. DOI: https://doi.org/10.1016/j.procir.2023.03.006
  7. Bai L, Liu H, Zhang J*, Zhao W. Real-time tool breakage monitoring based on dimensionless indicators under time-varying cutting conditions. Robotics and Computer-Integrated Manufacturing, 2023, 81: 102502. https://doi.org/10.1016/j.rcim.2022.102502
  8. Xu B, Zhang J*, Liu X, Liu H, Zhao W. Fully coupled thermomechanical simulation of laser-assisted machining Ti6Al4V reveals the mechanism of morphological evolution during serrated chip formation. Journal of Materials Processing Technology, 2023, 315: 117925. https://doi.org/10.1016/j.jmatprotec.2023.117925
  9. Tang Y, Zhang J*, Tian H, Liu H, Zhao W. Optimization method of spindle speed with the consideration of chatter and forced vibration for five-axis flank milling. The International Journal of Advanced Manufacturing Technology, 2023, 125: 3159–3169. https://doi.org/10.1007/s00170-023-10894-4
  10. Tang Y, Zhang J*, Hu W, Liu H, Zhao W. Prediction of Surface Location Error Considering the Varying Dynamics of Thin-Walled Parts during Five-Axis Flank Milling. Processes. 2023, 11(1): 242. https://doi.org/10.3390/pr11010242
  11. Liu H*, Birembaux H, Ayed Y, Rossi F, Poulachon G*. Recent advances on cryogenic assistance in drilling operation: A critical review. Journal of Manufacturing Science and Engineering – Transactions of the ASME, 2022, 144(10): 100801. DOI: https://doi.org/10.1115/1.4054518
  12. Liu H, Xu X, Zhang J*, Liu Z, He Y, Zhao W, Liu Z. The state of the art for numerical simulations of the effect of the microstructure and its evolution in the metal-cutting processes [J]. International Journal of Machine Tools & Manufacture, 2022, 177: 103890. DOI: https://doi.org/10.1016/j.ijmachtools.2022.103890
  13. Liu H*, Ayed Y, Birembaux H, Rossi F, Poulachon G. Impacts of flank wear and cooling strategies on evolutions of built-up edges, diffusion wear and cutting forces in Ti6Al4V machining [J]. Tribology International, 2022, 171: 107537. DOI: https://doi.org/10.1016/j.triboint.2022.107537
  14. Tang Y, Zhang J*, Zhang H, Zhao W, Liu H. Generalized equivalent method for dynamics of multipocket thin-walled parts [J]. The International Journal of Advanced Manufacturing Technology, 2022, 120(3): 2731–2745. DOI: https://doi.org/10.1007/s00170-022-08961-3
  15. Liu H*, Birembaux H, Ayed Y, Rossi F, Poulachon G. A hybrid modelling approach for characterizing hole shrinkage mechanisms in drilling Ti6Al4V under dry and cryogenic conditions [J]. The International Journal of Advanced Manufacturing Technology, 2022, 118(11): 3849-3868. DOI: https://doi.org/10.1007/s00170-021-08229-2
  16. Liu H, Xiao Y, Zhang J*, Xu X, Liu Z, Zhao W. Dynamic stress propagation induced transition of stress state and microstructure characteristics during high-speed cutting of OFHC copper [J]. The International Journal of Advanced Manufacturing Technology, 2021, 115(7): 2365-2378. DOI: https://doi-org/10.1007/s00170-021-07292-z
  17. Liu H, Shin YC*. A crystal plasticity finite element-based approach to model the constitutive behavior of multi-phase steels [J]. Archives of Civil and Mechanical Engineering, 2021, 21(2): 1-14. DOI: https://doi.org/10.1007/s43452-021-00226-2
  18. Liu H, Zhang J*, Xu B, Zhang H, Zhao W. Whole process analysis of microstructure evolution during chip formation of high-speed machining OFHC copper [J]. Journal of Manufacturing Processes, 2021, 66: 470-482. DOI: https://doi.org/10.1016/j.jmapro.2021.04.038
  19. Zhang J*, Liu Z, Liu H, Xu X, Outeiro J, Zhao W. Fragmented chip formation mechanism in high-speed cutting from the perspective of stress wave effect [J]. CIRP Annals – Manufacturing Technology, 2021, 70(1): 53-56. DOI: https://doi.org/10.1016/j.cirp.2021.03.016
  20. Xu B, Zhang J*, Liu H, Xu X, Zhao W. Serrated Chip Formation Induced Periodic Distribution of Morphological and Physical Characteristics in Machined Surface During High Speed Machining of Ti6Al4V [J]. Journal of Manufacturing Science and Engineering – Transactions of the ASME, 2021, 143(10): 101006. DOI: https://doi.org/10.1115/1.4050760
  21. Liu H, Zhang J*, Xu B, Xu X, Zhao W. Prediction of microstructure gradient distribution in machined surface induced by high speed machining through a coupled FE and CA approach [J]. Materials & Design, 2020, 196: 109133. DOI: https://doi.org/10.1016/j.matdes.2020.109133
  22. Zhang J*, Xu X, Outeiro J, Liu H, Zhao W. Simulation of grain refinement induced by high-speed machining of OFHC copper using cellular automata method [J]. Journal of Manufacturing Science and Engineering – Transactions of the ASME, 2020, 142(9): 091006. DOI: https://doi.org/10.1115/1.4047431
  23. Liu H, Zhang J*, Xu X, He Y, Liu Z, Zhao W. Numerical study on stress wave induced dislocation density evolution during high-speed machining [C]. High Speed Machining (HSM) Conference 2019, Prague, Czech
  24. Liu H, Zhang J*, Xu X, Qi Y, Liu Z, Zhao W. Effects of Dislocation Density Evolution on Mechanical Behavior of OFHC Copper during High-Speed Machining [J]. Materials, 2019, 12(15): 2348. DOI: https://doi.org/10.3390/ma12152348
  25. Xu X, Zhang J*, Liu H, He Y, Zhao W. Grain refinement mechanism under high strain-rate deformation in machined surface during high speed machining Ti6Al4V [J]. Materials Science and Engineering: A, 2019, 752: 167-179. DOI: https://doi.org/10.1016/j.msea.2019.03.011
  26. Xu X, Zhang J*, Liu H, Qi Y, Liu Z, Zhao W. Effect of morphological evolution of serrated chips on surface formation during high speed cutting Ti6Al4V [J]. Procedia CIRP, 2018, 77: 147-150. DOI: https://doi.org/10.1016/j.procir.2018.08.262
  27. Liu H, Zhang J*, Xu X, Zhao W. Experimental study on fracture mechanism transformation in chip segmentation of Ti-6Al-4V alloys during high-speed machining [J]. Journal of Materials Processing Technology, 2018, 257: 132-140. DOI: https://doi.org/10.1016/j.jmatprotec.2018.02.040
  28. Jiang Y, Zhang J*, He Y, Liu H, Memon A, Zhao W. Discrete Element Simulation of the Stress Wave in High Speed Milling [C] // International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2017, 50725: V001T02A033. DOI: https://doi.org/10.1115/MSEC2017-2906
  29. He Y, Zhang J*, Qi Y, Liu H, Memon A, Zhao W. Numerical study of microstructural effects on chip formation in high speed cutting of ductile iron with discrete element method [J]. Journal of Materials Processing Technology, 2017, 249: 291-301. DOI: https://doi.org/10.1016/j.jmatprotec.2017.06.006
  30. Liu H, Zhang J*, Xu X, Jiang Y, He Y, Zhao W. Effect of microstructure evolution on chip formation and fracture during high-speed cutting of single phase metals [J]. The International Journal of Advanced Manufacturing Technology, 2017, 91(1-4): 823-833. DOI: https://doi.org/10.1007/s00170-016-9823-6
  31. Jiang Y, Zhang J*, He Y, Liu H, Zhao W. Nonlinear propagation of stress waves during high speed cutting [J]. Applied Physics Letters, 2016, 109(19): 191904. DOI: https://doi.org/10.1063/1.4967514
  32. Liu H, Zhang J*, Jiang Y, He Y, Xu X, Zhao W. Investigation on morphological evolution of chips for Ti6Al4V alloys with the increasing milling speed [J]. Procedia CIRP, 2016, 46: 408-411. DOI: https://doi.org/10.1016/j.procir.2016.03.127
  33. He Y, Zhang J*, Jiang Y, Liu H, Zhao W. Discrete element simulation of machining cracks in brittle materials during high speed cutting [C] // Materials Science Forum. Trans Tech Publications Ltd, 2016, 836: 117-125. DOI: https://doi.org/10.4028/www.scientific.net/MSF.836-837.117

  • 总访问量

  • 今日访问量

  • 月访问量

版权所有：西安交通大学 陕ICP备05001571号