Effect of geometric construction on residual stress distribution in designing a nuclear rotor joined by multipass narrow gap welding
Release Time:2025-04-30
Hits:
- Date:
- 2025-04-30
- Title of Paper:
- Effect of geometric construction on residual stress distribution in designing a nuclear rotor joined by multipass narrow gap welding
- Journal:
- Fusion Engineering and Design
- Summary:
- The purpose of this study is to investigate the effect of geometric construction on the distribution of residual stresses before and after heat treatment in designing a nuclear welded rotor. The local material removal method was used to measure internal residual stress of the experimental pipe after post weld heat treatment. Three finite element models were employed as follows: a model of experimental pipe, a model with a bottom protrusion existed at the weld region, and a model of two rotor discs butt-welded with a bottom protrusion at the weld region. Investigated results showed that the bottom protrusion existed at the weld region can decrease the residual stress and mitigate the stress evolution significantly on the inner surface. Under the binding effect of the rotor discs, the axial stress of inner surface region is compressive stress; the through-wall axial stress at the weld center line can be deemed to a bending type; both the hoop stress and axial stress at the weld center line on the inner surface are compressive. The impact of geometric construction on the stress evolution at the root bead begins after pass 15 deposited.
- Co-author:
- Tan L, Zhang LJ*, Zhang JX, Zhuang D.
- Volume:
- 89(4)
- Page Number:
- 456–465
- Translation or Not:
- No
- Date of Publication:
- 2014-04-01