Analysis of Axial Magnetic Field of an Iron Style Bipolar Axial Magnetic Field Vacuum Interrupter
发布时间：2025-04-30
点击次数：
- 发布时间：
- 2025-04-30
- 论文名称：
- Analysis of Axial Magnetic Field of an Iron Style Bipolar Axial Magnetic Field Vacuum Interrupter
- 发表刊物：
- IEEE TRANSACTIONS ON PLASMA SCIENCE
- 摘要：
- An axial magnetic field (AMF) electrode for a vacuum interrupter iron style bipolar electrode (ISBE), is improved
in order to distribute vacuum arc over contact plate as much as possible and reduce eddy current in iron cores. The improvements include increasing iron core area to the edge of contact plate and using laminated iron core (1.2 mm in our case), based on analysis of AMF in the gap and eddy current in iron cores. AMF measurement results show that axial magnetic flux density of improved ISBE is almost two times stronger than that of original one, and there is only a little loss at edge of contact plate. However, the axial magnetic flux density of original ISBE at edge of contact plate is much lower. The vacuum arc picture recorded by a high speed CCD camera proves that AMF of improved ISBE has ability to distribute vacuum arc over most area of the entire contact surface, even at the edge region. Eddy current induces phase shift. The maximum value of phase shift in middle plane of contact gap of the original ISBE is 3.5 ms and it is reduced to 2.0 ms in the improved one, which is similar to other AMF electrodes.
- 合写作者：
- Liu Zhiyuan, Wang Jimei, Wang Zheng et al
- 卷号：
- VOL.29,NO.5
- 页面范围：
- 749-753
- 是否译文：
- 否
- 发表时间：
- 2001-12-21
- 上一条：杯状纵磁真空灭弧室三维涡流场仿真
- 下一条：铁芯式两极纵磁真空灭弧室铁芯中涡流分析