Lightning Impulse Voltage Breakdown Characteristics of Vacuum Interrupters with Contact Gaps 10mm to 50mm
发布时间：2025-04-30
点击次数：
- 发布时间：
- 2025-04-30
- 论文名称：
- Lightning Impulse Voltage Breakdown Characteristics of Vacuum Interrupters with Contact Gaps 10mm to 50mm
- 发表刊物：
- IEEE Transactions on Dielectrics and Electrical
- 摘要：
- The objective of this paper is to understand the standard lighting impulse voltage breakdown characteristics of vacuum interrupters with contact gaps 10 to 50mm and how contact parameters influence the breakdown characteristics. The investigated contact parameters include contact diameter 75mm and 60mm, contact surface roughness 1.6 11 m and 3.2 11 m, and contact radius of curvature 6mm and 2mm. Therefore we designed four high-voltag vacuum interrupters in the experiments. The vacuum interrupters were put into a porcelain envelope with SF6 gas as an external insulation of the vacuum interrupters. The contact gaps can be adjusted manually. Negative polarity basic impulse level (BIL) voltage (1.2x50IlS) was applied by an up-and-down method. Experimental results revealed the breakdown probability distribution followed a Weibull distribution when the breakdownvoltagesaturated in the investigated contact gaps 10 to 50mm. And 50% breakdown voltage U50 depends on the contact gap d (10-50mm), can be expressed by an equation U50=kd', where ex is a power exponent; k denotes acoefficient which is determined by experiments. Within the contact gaps 10 to 50mm, U50 of vacuum interrupter with
contact radius of curvature 2mm was significantly higher than that of vacuum interrupter with contact radius of
curvature 6mm. And U50 of contact roughness 1.6J1m was close to that of contact roughness 3.2J1m. U50 of the contact diameter 60mm was close to that of contact diameter 75mm.
- 合写作者：
- Zhang;Liu;Geng;Yang;wang
- 卷号：
- v18 n6
- 页面范围：
- 2123-2130
- 是否译文：
- 否
- 发表时间：
- 2011-10-12