发布时间：2025-04-30

论文名称：Construction of dynamic model of CANDU-SCWR using moving boundary method

发表刊物：Nuclear Engineering and Design

摘要：CANDU-SCWR(Supercritical Water-Cooled Reactor) is one type of Generation IV reactors being developed
in Canada. Its dynamic characteristics are different from existing CANDU reactors due to the supercritical
conditions of the coolant. To study the behaviours of such reactors under disturbances and to design
adequate control systems, it is essential to have an accurate dynamic model to describe such a reactor.
One dynamic model is developed for CANDU-SCWR in this paper. In the model construction process,
three regions have been considered: Liquid Region I, Liquid Region II and Vapour Region, depending on
bulk and wall temperatures being higher or lower the pseudo-critical temperature. A moving boundary
method is used to describe the movement of boundaries across these regions. Some benefits of adopting
moving boundary method are illustrated by comparing with the fixed boundary method. The results of
the steady-state simulation based on the developed model agree well with the design parameters. The
transient simulations demonstrate that the model can predict the dynamic behaviours of CANDU-SCWR.
Furthermore, to investigate the responses of the reactor to small amplitude perturbations and to facilitate
control system designs, a least-square based system identification technique is used to obtain a set of
linear dynamic models around the design point. The responses based on the linear dynamic models are
validated with simulation results from nonlinear CANDU-SCWR dynamic model.

合写作者：Peiwei Sun, Jin Jiang, Jianqiang Shan

卷号：241 (2011)

页面范围：1701–1714

是否译文：否

发表时间：2011-02-18