发布时间：2025-04-30

论文名称：Control and thermal analysis for SCWR startup

发表刊物：Annals of Nuclear Energy

摘要：Startup system, the design of startup sequences analysis is an important part of SCWR design. A thermal hydraulic system analysis code for supercritical water reactor named SCTRAN is used to model the entire startup system based on the circulation loop for startup and once-through direct cycle. The problem of the heat transfer coefficient (HTC) does not accurately capture deterioration phenomenon, the HTC is calculated as a discontinuity in the mode transfer region, its low prediction accuracy above the quasi-critical region have been solved by the new wall heat transfer model. Especially, the look-up table would not be used to obtain the HTC and achieves high prediction accuracy across the critical region, unless the pressure is higher than 19 MPa. After that, to get a smooth recirculation variable pressure startup process, the system model integrates the control system which can controls the temperature, the steam drum water level, the thermal power, and the coolant flow rate. Based on the CSR1000 core and entire once-through direct cycle and circulation loop for startup, four stages under control systems, from low pressure to full power condition in recirculation startup process, were analyzed with code SCTRAN and wall heat transfer model was modified. The calculation results show that the recirculation system can startup from subcritical state to full power state without issue of CHF. The control system can control the parameters quite well and maximum cladding temperature (MCST) can be limited under 650
C in the startup process. The modified SCTRAN code in this paper can further expand the computational range and computational accuracy. The full-scale control system can meet the needs of parameters expected response.

合写作者：Yuan Yuan, Jianqiang Shan, Li Wang, Xiaoying Zhang

卷号：134

页面范围：27–37

是否译文：否

发表时间：2019-09-17