3D turbulent Flow Modeling in the Separation Column of a Circumfluent Cyclone
发布时间：2025-04-30
点击次数：
- 发布时间：
- 2025-04-30
- 论文名称：
- 3D turbulent Flow Modeling in the Separation Column of a Circumfluent Cyclone
- 发表刊物：
- Powder Technology
- 摘要：
- A detailed study of the internal flow field for the separation column in a circumfluent cyclone separator has been of great significance in understanding its separation mechanism and thus improving its efficiency. The turbulent flow viscidity theory and average velocity field were used, based upon the Reynolds and continuity equations for the column geometry and coordinate system. An approximate analysis of the velocity and pressure distribution of the flow field inside the separating column was carried out, for which basic equations for three-dimensional velocity, pressure gradient and distribution of static pressurewere given. Results obtained fromexper-iments and prediction for tangential velocity and static pressure distribution are in very good agreement according to a specific set of experiments. More specifically, the tangential velocity of the inside separation column is charac-terized by its centrally symmetric distribution pattern, and the axial velocity is in basically axial symmetric distribu-tionwith the exception of the outlet vicinity. The value near the axial center reaches itsmaximum, which decreases gradually along the radial direction, and the value near the wall approaches zero. The value for static pressure near the axial center is the lowest one.When the length of the radius increases, the intensity of the pressure will also increase. Predictions showed that the axial line of the vortex core fishtails along the geometrical axial center when the gas in the separation column rotates at a high speed and results in an unstable flowfieldwhich reduces the separation efficiency.
- 合写作者：
- B.C. Shi, J. J. Wei*
- 卷号：
- 235
- 页面范围：
- 82-90
- 是否译文：
- 否
- 发表时间：
- 2012-10-13